Safeogril - Fencing system

Standard: BS1722-14: 2017, BS EN ISO 1461:2009, BS EN 13438:2013

Product Reference: CLD Safeogril Rigid Panel System

Panel type: Electrofused steel grating consisting of vertical flat bars with horizontal wires. Top and bottom flat bars. Galvanised and polyester powder-coated to a minimum of 60 microns

Panel width: 1992mm

Wire diameter: 30mm x 4mm vertical flat bars, 6mm horizontal wires. Tops and bottoms 30mm x 4mm flat bars.

Mesh size: Vertical flat bars at 62mm spacing and horizontal wires at 132mm spacing.

Heights:

Select as required 930mm, 1194mm, 1326mm, 1458mm, 1722mm, 1986mm, 2118mm or 2514mm (fencing can be made up of any combination of these sizes)

Nominal height: 1.0, 1.2m, 1.4m, 1.5m, 1.8m, 2.0m, 2.2m or 2.6m

Finish: Polyester powder-coated to minimum 60 microns.

Any RAL colour

Top edge projection: nil - flush

Panel installation: Bottom of panel maximum of 100mm above ground

Security topping n/a

Posts: RHS or SHS, depending on application – please contact CLD Fencing Systems for full details - galvanised after manufacture and polyester powder-coated to match fencing

Post dimensions: Depending upon application

Maximum post

Centres: Depending on post section

Fixings: Depending on application – please contact CLD Fencing Systems for full details.

Foundations: Set posts in holes 300mm diameter x 800mm deep (adjust according to fence height) Note: contractor/ client is responsible for the foundation size suitable for the ground conditions

Warranty: Minimum of 15 years against manufacturing defects.

Notes: All dimensions are nominal, for further information please contact CLD Fencing Systems.

Information is correct at time of production. As part of our policy of continuous improvement, we reserve the right to alter product specification without notice.