EGL ENCLOSED & GASKETED INDUSTRIAL

EGL ENCLOSED & GASKETED INDUSTRIAL

FEATURES

  • NEMA 4X, IP66, IP67, and NSF/ANSI Standard 2­–Splash Zone certified
  • Precisely formed lens provides maximum efficiency/reduced glare
  • Seamless closed-cell gasket, poured and formed in place
  • Hose-down tested at 1500 PSI at 1.4 GPM to withstand water penetration
  • Liquid-tight power entry
  • Standard stainless steel latches protect the fixture from corrosion in harsh environments
  • Tamper-resistant latches available
  • -40ºC minimum operating temperature
  • High-performance up to 158 lm/W
  • DLC Compliant
  • Buy American Act compliant
  • Wireless in-fixture control solutions available
  • Made Right Here® in the USA
Spesifikasjon
  • Enclosure

    Outer housing consists of 5VA (f1) fiberglass, rated for flame and weather resistance.

    Internal Housing

    .050″ aluminum.

    Latching

    Stainless steel latches. Injection-molded polycarbonate latches available (not recommended for use in harsh environments, such as a car wash).

    Reflector

    95% reflective highly specular aluminum.

    Reflective Surfaces

    92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All internal parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.

    Shielding

    Frosted, impact-resistant acrylic.

    Electrical

    High-quality mid-power LED board. L70 >50,000 hours. -20ºC to 40ºC maximum ambient operating temperature. -40ºC minimum operating temperature with LA40 option.

    Power Supply

    Fixture has holes in each end suitable for 1/2″ electrical trade size liquid-tight connectors. Power supply must be with flexible liquid-tight conduit or cord rated for wet location use.

    Mounting

    Surface or suspended using four stainless steel mounting straps and two flexible ceiling mount brackets included.

    Listings

    • • cETLus conforms to UL STD 1598 and UL STD 8750. Certified to CAN/CSA STD C22.2 No. 250.0. Suitable for wet locations when specified with watertight hub, STOW or SOOW cord, or mini-male receptacle option.
    • NSF/ANSI Standard 2–Splash Zone certified, IP65, IP66, and IP67 certified, and rated for NEMA 4X.
    • DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL.
    • Complies with the Buy American Act and other federal regulations. Request certification at hew.com/baa.

    Warranty

    5-year limited warranty, see details
Tekniske spesifikasjoner
  • Unik ref.egl-enclosedgasketed-industrial
  • ProduktfamilieIndoor Luminaires
  • ProduktgruppeVandal Resistant
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2025-06-18
  • Utgavenummer1
Relatert
  • HovedmaterialeMetall
  • Sekundært materialeGlass
  • Designet iUSA
  • Produsert iUSA
Klassifisering
  • BIMobject kategoriBelysning - Takmontert
  • IFC-klassifiseringlysarmaturen
  • Uniclass 2015 kodeEF_70_80
  • Uniclass 2015 beskrivelseLighting
  • CSI MasterFormat 2014 kode26 51 13
  • CSI MasterFormat 2014 tittelInterior Lighting Fixtures, Lamps, And Ballasts
  • OmniClass-nummer23-35 47 11
  • OmniClass-tittelLighting Fixtures

Tilgjengelighet etter region

Nord Amerika
Anguilla
Antigua og Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Cayman Islands
Costa Rica
Cuba
Curaçao
Den dominikanske republikk
Dominica
El Salvador
Grenada
Grønland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Jomfruøyene
Jomfruøyene
Karibisk Nederland
Martinique
Mexico
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts og Nevis
Saint Lucia
Saint Pierre og Miquelon
Saint Vincent og Grenadinene
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad og Tobago
Turks- og Caicosøyene
USA