BLUEHELIX PRO RRT 24 C - 28 C - 32 C
Ferroli

BLUEHELIX PRO RRT 24 C - 28 C - 32 C

Condensing wall hung boiler for heating and istantaneous domestic hot water by an integrated exchanger. BLUEHELIX PRO RRT C can operate with Natural gas and LPG. Range: Model 24 C Max output power in heating mode (50/30°C) 21,7 kW Max output power in DHW mode (50/30°C) 24,0 kW Domestic flow rate Δt 25°C 13,8 l/min Class ErP: Heating A / DHW XL/A Model 28 C Max output power in heating mode (50/30°C) 26,0 kW Max output power in DHW mode (50/30°C) 27,5 kW Domestic flow rate Δt 25°C 15,8 l/min Class ErP: Heating A / DHW XL/A Model 32 C Max output power in heating mode (50/30°C) 32,5 kW Max output power in DHW mode (50/30°C) 32,0 kW Domestic flow rate Δt 25°C 18,3 l/min Class ErP: Heating A / DHW XXL/A
Spesifikasjon
  • Model 24 C W/H/D 420 mm / 700 mm / 250 mm Empty weight 28 Kg Model 28 C W/H/D 420 mm / 700 mm / 250 mm Empty weight 28 Kg Model 32 C W/H/D 420 mm / 700 mm / 320 mm Empty weight 32 Kg - Careful design of aesthetics and silent operation, it maintains the legacy of appreciation of the previous “Bluehelix Pro” series - INOX DUAL exchanger: boiler with high thickness stainless steel primary exchanger for heating and DHW built into a single component (DUAL). - Exclusive exchanger-burner system with self-cooling door: it simplifies maintenance and lowers the cost thanks to a lower number of parts that need replacing - High efficiency also during operation in DHW mode (94 %). 3-star certified comfort with domestic hot water production in accordance with EN 13203 - Larger hydraulic passes of the exchanger, in both the heating and DHW circuits. - A+ SYSTEM: combined with the modulating remote control and the external probe (optional) it reaches the top efficiency class A+ (scale from G to A+++) - MC2: Multi Combustion Control, new combustion system with industrial-derived gas-adaptive patented technology for better adaptability of use to the varying gas network conditions (ex. pressure fluctuations or drops) - M.G.R: Methane, LPG, Propane-air Ready with a simple configuration the boiler can run on methane, LPG and propane-air without the use of any additional conversion kits - Hydraulic fittings covered by the boiler shell - Large multi-purpose backlit graphic display to set parameters easily and correctly - By-pass with standard supply - Suitable for the ducting flue pipe system. Is certificated to operate with 50 mm flue gas accessories. - Designed to be used with solar systems: designed for the production of domestic hot water combined with solar panel systems - ECO function in domestic mode for greater savings when hot water is rarely used - Sliding temperature control with optional external probe - Low-consumption modulating pump (ErP Ready – Class A) - Digital flame control with three ignition attempts in the event of operation block if no flame is detected (only for methane-based operation) - Installation site: Outdoors in a partially protected area up to -5°C as standard and up to -15°C with the support of the optional antifreeze resistor kit
Tekniske spesifikasjoner
  • Unik ref.BLUEHELIX-PRO-RRT
  • ProduktfamilieHVAC - Boilers
  • ProduktgruppeBoilers
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2019-09-05
  • Utgavenummer1
Relatert
  • HovedmaterialeMetall
  • Sekundært materialePlastikk
  • Designet iItalia
  • Produsert iItalia
Klassifisering
  • BIMobject kategoriVVS - Varmtvannsberedere
  • IFC-klassifiseringBereder
  • UNSPSC-navnBoilers
  • UNSPSC-kode401020
  • Uniclass 2015 kodePr_60_60_08
  • Uniclass 2015 beskrivelseBoilers
  • CSI MasterFormat 2014 kode23 52 00
  • CSI MasterFormat 2014 tittelHeating Boilers
  • OmniClass-nummer23-33 11 13
  • OmniClass-tittelCondensing Boilers
  • CSI UniFormat II kodeD3020
  • CSI UniFormat II tittelHeat Generating Systems

Tilgjengelighet etter region

Europa
Åland
Albania
Andorra
Belgia
Bosnia-Hercegovina
Bulgaria
Danmark
Estland
Færøyene
Finland
Frankrike
Gibraltar
Guernsey
Hellas
Hviterussland
Irland
Island
Isle of Man
Italia
Jersey
Kroatia
Kypros
Latvia
Liechtenstein
Litauen
Luxemburg
Malta
Moldova
Monaco
Montenegro
Nederland
Nord-Makedonia
Norge
Østerrike
Polen
Portugal
Romania
Russland
San Marino
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Svalbard og Jan Mayen
Sveits
Sverige
Tsjekkia
Tyskland
Ukraina
Ungarn
Vatikanstaten
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit