BLUEHELIX MAXIMA 28C - 34C
Ferroli

BLUEHELIX MAXIMA 28C - 34C

Condensing wall hung boiler for heating and istantaneous domestic hot water by a dedicated steel plate exchanger.  
BLUEHELIX MAXIMA C can operate with Natural gas and LPG.

Range:
Model 28 C Max output power in heating mode (50/30°C) 26,0 kW
Max output power in DHW mode 28,0 kW
Domestic flow rate Δt 25°C 16,1 l/min
Class ErP: Heating A+ / DHW XL/A

Model 34 C Max output power in heating mode (50/30°C) 32,5 kW
Max output power in DHW mode 34,0 kW
Domestic flow rate Δt 25°C 19,5 l/min
Class ErP: Heating A+ / DHW XXL/A

Spesifikasjon
  • • Boiler with extra-thick stainless-steel primary heat exchanger, with increased sections (at the top of its range) to ensure durability and reduced maintenance, it maintains high efficiency levels 
    • It reaches one of the highest seasonal efficiency levels in terms of heating: ηs 94% and when combined with the modulating remote control and the external probe (both of which are optional), it reaches the highest energy efficiency class (scale from G to A+++)
    • Class 6 NOx: already in line with the ErP regulation since 26.09.2018 (NOx emissions < 56mg/kWh)
    • MC2 (Multi Combustion Control9: new combustion system with patented gas-adaptive technology of industrial origin for better adaptability of use as the conditions according to the variations of the gas mains (e.g. fluctuations or reduced pressure)
    • Modulation range up to 1:12 for the 34C model and 1:10 for the 24 C
    • MLR (Methane LPG Ready): via a simple configuration, the boiler can operate both with methane and LPG without using additional conversion kits
    • Exclusive exchanger-burner system with self-cooled door (without insulation): it simplifies maintenance and reduces its cost thanks to a smaller amount of parts subject to deterioration 
    • Instant production of domestic hot water with dedicated domestic plate exchanger
    • Hydraulic couplings covered by the boiler casing 
    • Large backlit multifunctional graphic display to set the parameters easily and correctly
    • Suitable for the ducting flue pipe system. Is certificated to operate with 50 mm flue gas accessories.
    • FPS (Flue Protection System): The flue check valve installed as standard on the boiler allows for easy connection to collective pressure flue systems (e.g. in redevelopment projects)
    • Designed to be used with solar systems: designed for the production of domestic hot water combined with solar panel systems
    • ECO function in domestic mode for greater savings when hot water is rarely used
    • 3-star certified comfort with domestic hot water production in accordance with EN 13203
    • Sliding temperature control with optional external probe
    • Digital flame control with three ignition attempts in the event of operation block if no flame is detected (only for methane-based operation)
    • Outdoors installation in a partially protected area up to -5°C as standard and up to -15°C with the support of the optional antifreeze resistor kit

Tekniske spesifikasjoner
  • Unik ref.BLUEHELIX-MAXIMA
  • ProduktfamilieHVAC - Boilers
  • ProduktgruppeBoilers
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2020-08-03
  • Utgavenummer1
  • Høyde (mm)700
  • Bredde (mm)420
  • Dybde (mm)320
Lenker
Relatert
  • HovedmaterialeMetall
  • Sekundært materialePlastikk
  • Designet iItalia
  • Produsert iItalia
  • Nettovekt (kg)30
Klassifisering
  • BIMobject kategoriVVS - Varmtvannsberedere
  • IFC-klassifiseringBereder
  • UNSPSC-navnBoilers
  • UNSPSC-kode401020
  • Uniclass 2015 kodePr_60_60_08
  • Uniclass 2015 beskrivelseBoilers
  • CSI MasterFormat 2014 kode23 52 00
  • CSI MasterFormat 2014 tittelHeating Boilers
  • OmniClass-nummer23-33 11 13
  • OmniClass-tittelCondensing Boilers
  • CSI UniFormat II kodeD3020
  • CSI UniFormat II tittelHeat Generating Systems

Tilgjengelighet etter region

Europa
Åland
Albania
Andorra
Belgia
Bosnia-Hercegovina
Bulgaria
Danmark
Estland
Færøyene
Finland
Frankrike
Gibraltar
Guernsey
Hellas
Hviterussland
Irland
Island
Isle of Man
Italia
Jersey
Kroatia
Kypros
Latvia
Liechtenstein
Litauen
Luxemburg
Malta
Moldova
Monaco
Montenegro
Nederland
Nord-Makedonia
Norge
Østerrike
Polen
Portugal
Romania
Russland
San Marino
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Svalbard og Jan Mayen
Sveits
Sverige
Tsjekkia
Tyskland
Ukraina
Ungarn
Vatikanstaten
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit