2GP CDA

2GP CDA

Booster sets with two horizontal twin impeller pumps with cast iron hydraulics Two CDA series pumps with self-ventilated 2-pole asynchronous motor, IE3 efficiency class for three phase motors starting from 0.75 kW. The system is equipped as standard with a control panel with alternating pump and is designed for the installation of storage tanks (available on request).
Spesifikasjon
  • • Maximum liquid temperature: 40°C for 2GP CDA 1.00, 50°C for the rest of the models • Maximum operating pressure: 10 bar • Water with maximum presence of solids: ppm (particle size 0.1-0.25 mm or less), or corrosive and aggressive substances • Maximum chlorine content: 500 ppm • Altitude not exceeding 1000 m a.s.l.; • Humidity 50% without condensation • Ambient protected against atmospheric agents. • Cast iron pump body • Shaft in AISI 303 for CDA 1.00-1.50-2.00-3.00, in AISI 304 for CDA 4.00 - 5.50 • Glass fibre reinforced technopolymer impeller for CDA 1.00, brass for the rest of the range • Mechanical seal in Ceramic/Carbon/NBR • IE3 motor starting from 0.75kW • Self-ventilated 2-pole asynchronous motor • Class of insulation F • IP44 Protection degree • Single-phase voltage 230V ±10% 50Hz,Threephase voltage 230/400V ±10% 50Hz
Tekniske spesifikasjoner
  • Unik ref.2GP-CDA
  • ProduktfamilieBooster sets with control panel
  • Produktgruppewith two centrifugal pumps
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2019-09-23
  • Utgavenummer1
Relatert
  • HovedmaterialeCast iron
  • Designet iItalia
  • Produsert iItalia
Klassifisering
  • BIMobject kategoriRørsystem - Pumper
  • Uniclass 2015 kodePr_65_53_86_66
  • Uniclass 2015 beskrivelsePressure booster pumps
  • CSI MasterFormat 2014 kode22 11 23.13
  • CSI MasterFormat 2014 tittelDomestic-Water Packaged Booster Pumps

Tilgjengelighet etter region

Europa
Åland
Albania
Andorra
Belgia
Bosnia-Hercegovina
Bulgaria
Danmark
Estland
Færøyene
Finland
Frankrike
Gibraltar
Guernsey
Hellas
Hviterussland
Irland
Island
Isle of Man
Italia
Jersey
Kroatia
Kypros
Latvia
Liechtenstein
Litauen
Luxemburg
Malta
Moldova
Monaco
Montenegro
Nederland
Nord-Makedonia
Norge
Østerrike
Polen
Portugal
Romania
Russland
San Marino
Serbia
Slovakia
Slovenia
Spania
Storbritannia
Svalbard og Jan Mayen
Sveits
Sverige
Tsjekkia
Tyskland
Ukraina
Ungarn
Vatikanstaten
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit