KDN
Dab Pumps

KDN

4.5 av 5 stjerner4.5(24 anmeldelser)

Standardised centrifugal single-stage pumps, designed for a wide range of applications, such as:
Water supply. Hot water circulation for the heating system. Circulation of cold water for air conditioning and refrigeration systems.
Transfer of liquids in agricultural, horticultural, and industrial environments. Installation of pumping assemblies.
They can be coupled, using an elastic joint (standard or spacer), to a 2-pole or 4-pole electric motor, and installed on a formed metal sheet base in accordance with UNI EN 23661.

Operating range: flow up to 470 m3/h, head up to 143 metres.

Maximum operating pressure: 16 bar - 1600 kPa (for DN 200 max 10 bar).

Installation: normally in the horizontal position.

Pumped liquid temperature range: from -10°C to +140°C.

Spesifikasjon
  • APPLICATIONS

    Standardised centrifugal single-stage pumps, designed for a wide range of applications, such as:

    Water supply.

    Hot water circulation for the heating system.

    Circulation of cold water for air conditioning and refrigeration systems.

    Transfer of liquids in agricultural, horticultural, and industrial environments.

    Installation of pumping assemblies.

    They can be coupled, using an elastic joint (standard or spacer), to a 2-pole or 4-pole electric motor, and installed on a formed metal sheet base in accordance with UNI EN 23661.

    CONSTRUCTION FEATURES OF THE PUMP

    Cast iron single stage spiral body complying with DIN-EN 733 (formerly DIN 24255), seal holder cover and cast iron motor support, flanges complying with DIN 2533 (DIN 2532 for DN 200). Cast iron impeller, closed and dynamically balanced, with compensation of the axial thrust through balancing holes, operation on interchangeable wear rings (on request). Stainless steel pump shaft supported by two permanently lubricated oversized ball bearings, housed inside an appropriate chamber in the support.

    Standard seal device: standardised mechanical seal according to DIN 24960 in carbon/silicon carbide with EPDM OR rings.

    Packing with lubricating hydraulic ring and stuffing box in two easily removable parts available on request.

Tekniske spesifikasjoner
  • Unik ref.KDN
  • ProduktfamilieCentrifugal Pumps
  • ProduktgruppeCentrifugal Pumps
  • TypeObjekt (enkelt objekt)
  • Utgivelsesdato2022-01-24
  • Utgavenummer1
Relatert
  • HovedmaterialeCast iron
  • Designet iItalia
  • Produsert iItalia
Klassifisering
  • BIMobject kategoriRørsystem - Pumper
  • IFC-klassifiseringrørtilpasning
  • UNSPSC-navnCentrifugal pumps
  • UNSPSC-kode40151503
  • Uniclass 2015 kodePr_65_53_86_12
  • Uniclass 2015 beskrivelseCentrifugal pumps
  • OmniClass-nummer23-27 17 13
  • OmniClass-tittelCentrifugal Pumps
  • CSI UniFormat II kodeD20
  • CSI UniFormat II tittelPLUMBING
Common.Footer.ValueProp.Image.AltText

Design App for Revit

Last inn familier direkte i Revit-modellen din med ett klikk

Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

  • Huk avArbeid direkte med BIM-objekter ved siden av Revit
  • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
  • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit