RO-E - Reverse Osmosis
RO-E - Reverse Osmosis
    Condair

    RO-E - Reverse Osmosis

    Reverse osmosis (RO) is an effective and economic way of removing minerals from water. The Condair RO-E has been developed specifically to provide operational, energy and maintenance benefits to Condair humidifiers.

    By removing the minerals from a humidifier’s supply water, the limescale that builds-up in the system is virtually eliminated. This results in a much lower level of required maintenance in all types of humidifier and reduced energy consumption in steam humidifiers.

    Steam humidifiers that run on mains water need to drain their boiling chambers occasionally to maintain a low mineral content and reduce limescale build-up. By using RO supply water, the steam humidifier’s boiling chamber does not require this regular drain. Therefore it uses less energy to maintain the water’s temperature.

    As the water temperature is consistent, the steam output is also consistent, thus improving humidity control. By using resistive steam humidifiers fed by RO water, ±1%RH control can be achieved.

    Other benefits of using RO water with humidifiers include increasing the life of the evaporative pads in evaporative humidifiers and preventing dust carry-over in spray humidifiers.

    Spesifikasjon
    • Condair RO-E 

      • Voltage: 230V 
      • Frequency: 50 Hz


      Options:

      • All models show the optional housing cover


      Version:

      • Version + is for use with adiabatic humidifiers
      • Models with safety valve are mandatory for CE markets. Note: RO-E 200 and 300 require the safety valve by the external pressure tank. Please consider the instruction in the installation manual! 


      RO-E 40

      Pure water output at 5 °C water temperature against 1 bar: 58 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 98 l/hr


      RO-E+ 40 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 36 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 59 l/hr


      RO-E 100

      Pure water output at 5 °C water temperature against 1 bar: 105 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 181 l/hr


      RO-E+ 100 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 67 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 114 l/hr


      RO-E 200

      Pure water output at 5 °C water temperature against 1 bar: 200 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 352 l/hr


      RO-E+ 200 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 124 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 218 l/hr


      RO-E 300

      Pure water output at 5 °C water temperature against 1 bar: 285 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 513 l/hr


      RO-E+ 300 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 171 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 312 l/hr

    Tekniske spesifikasjoner
    • Unik ref.condair-ro-e
    • ProduktfamilieWater Treatment
    • ProduktgruppeReverse Osmosis
    • TypeObjekt (enkelt objekt)
    • Utgivelsesdato2025-10-02
    • Utgavenummer1
    • Høyde (mm)792
    • Bredde (mm)587
    • Dybde (mm)484
    Relatert
    • HovedmaterialePulvermalt stål
    • Designet iSveits
    • Produsert iTyskland
    Klassifisering
    • BIMobject kategoriVVS - VVS / rør
    • IFC-klassifiseringFilter
    • Uniclass 2015 kodePr_60_55_97_72
    • Uniclass 2015 beskrivelseReverse osmosis units
    • OmniClass-nummer23-39 41 13 15
    • OmniClass-tittelReverse Osmosis and Nanofiltration Membrane Equipment

    Tilgjengelighet etter region

    Sør Amerika Europa Oceania Asia Afrika
    Argentina
    Belgia
    Australia
    India
    Sør-Afrika
    Chile
    Bulgaria
    New Zealand
    Indonesia
    Uruguay
    Danmark
    Israel
    Estland
    Kina
    Finland
    Pakistan
    Frankrike
    Singapore
    Hellas
    Thailand
    Irland
    Tyrkia
    Island
    Italia
    Kroatia
    Latvia
    Litauen
    Nederland
    Norge
    Østerrike
    Polen
    Portugal
    Romania
    Serbia
    Slovakia
    Slovenia
    Spania
    Storbritannia
    Sveits
    Sverige
    Tsjekkia
    Tyskland
    Ukraina
    Ungarn
    Common.Footer.ValueProp.Image.AltText

    Design App for Revit

    Last inn familier direkte i Revit-modellen din med ett klikk

    Få et sted for enklere tilgang til nye objekter, lagre Revit-familiene dine og samarbeid med teamet ditt.

    • Huk avArbeid direkte med BIM-objekter ved siden av Revit
    • Huk av 2 GB skylagring – lagre Revit-innholdet ditt
    • Huk av Få LCA for innebygd karbon (A1–A3) direkte fra Revit