Fabrisorb™ Decorative Fabric Wrapped Acoustic Panels

SECTION 09 84 33

Noise S.T.O.P. Fabrisorb^TM Fabric Wrapped Acoustical Wall Panels

PART 1 GENERAL

1. SECTION INCLUDES

1. Noise S.T.O.P. Fabrisorb^TM fabric wrapped acoustical wall panels and accessories for wall installation.

1. REFERENCES

1. American Society for Testing and Materials (ASTM)

1. ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials.

1. ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.

1. ASTM E795: Standard Practices for Mounting Test Specimens During Sound Absorption Tests

1. ICC IBC: International Building Code

1. SUBMITTALS

1. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified acoustical panel.

1. Test Reports: Upon request, submit certified test reports to verify specified product performance.

1. QUALITY ASSURANCE

1. Qualifications:

1. Manufacturers: Provide acoustical wall panels from a single manufacturer.

1. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.

1. Surface Burning Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM E84. Acoustical panel surface burning performance should comply with the International Building Code and other local building code requirements.

1. Acoustical Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM C423.

1. DELIVERY, STORAGE, AND HANDLING

1. Handle panels carefully to avoid any damage.

1. Store panels indoors in a clean, cool, dry place, and out of direct sunlight.

1. Store panels in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.

1. SITE CONDITIONS

1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.

1. Do not install products under environmental conditions outside manufacturer’s recommended limits.

1. WARRANTY

1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

PART 2 PRODUCTS

(Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional Fabrisorb information can be found on our website: www.acousticalsurfaces.com

MANUFACTURERS

1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
   Phone: 952-448-5300. Fax: 952-448-2613. Website: www.acousticalsurfaces.com
2. DESCRIPTION

1. Noise S.T.O.P. Fabrisorb^TM fabric wrapped acoustical wall panels by Acoustical Surfaces, Inc.

1. Product Options:

1. Panel Composition: Fiberglass core wrapped with acoustically transparent fabric facing
   (Optional: High density fiberglass impact layer – adds 1/8” to panel
   thickness)

1. Panel Density: 6 lb. pcf

1. Panel Thickness: (1/2”) / (3/4”) / (1”) / (1 1/2”) / (2”) / (3”) / (4”)

1. Panel Size: (2’ x 2’) / (2’ x 4’) / (Nominal 4’ x 8’) / (Custom up to 4’ x 10’)

1. Edge Profile: (Square) / (Bevel) / (Half-Bevel) / (Radius)

1. Finish: Wide range of standard and custom facing options

1. Mounting Method: (Z-clip) / (Impaling Clips with Adhesive) / (Rotofast Clips)

1. Acoustical Performance

1. Noise Reduction Coefficient (NRC) per ASTM C423

1. Surface Burning Performance

1. Fire Rating per ASTM E84: Class A.

PART 3 EXECUTION

1. EXAMINATION

1. Verification of Conditions:

1. Examine surfaces scheduled to received furred out or directly attached acoustical units for unevenness, irregularities or dampness that would affect quality and execution of work.

1. All wet work in the installation area must be complete, cured, and dry prior to installation.

1. Wall assembly shall be complete, inspected, and accepted before wall work begins.

1. INSTALLATION
2. Comply with manufacturer’s instructions and recommendations for installation of wall panels and with industry standards.
3. CLEANING
4. Clean surfaces of wall panels per manufacturer’s instructions or recommendations.
5. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
6. PROTECTION
7. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

END OF SECTION

Keywords:
acoustic wall panels
fabric wrapped acoustic panels
sound absorption panels
decorative acoustic panels
custom acoustic panels
commercial sound control
office acoustical panels
beautiful acoustics
custom-made acoustical panels
fabric acoustical panels
fabric wrapped fiberglass panels
high-end acoustical panels
decorative acoustic wall panels
sound absorption wall panels
commercial acoustic panels
office acoustic wall panels
high-performance sound absorption panels
broadband acoustic absorption
noise reduction wall panels
improved speech clarity and sound quality
fire-rated acoustic panels
impact-resistant fiberglass panels
low-VOC sustainable acoustics
thermal and acoustic insulation properties
custom fabric wrapped panels
color and fabric options for acoustic panels
designer acoustic wall panels
architectural acoustical solutions
decorative sound absorption panels
edge profile options (square, beveled, radius)
custom sizes and shapes for acoustic panels
acoustic panels for offices and conference rooms
sound absorption panels for schools and classrooms
fabric wrapped panels for auditoriums and lecture halls
decorative acoustic panels for hospitality spaces
noise control panels for open-plan workspaces
acoustic treatment for theaters and performance spaces
sound absorption panels for residential interiors
easy-to-install fabric wrapped panels
wall-mounted acoustic panels
mechanical fastener installation
adhesive installation options
lightweight fiberglass acoustic panels
durable and long-lasting acoustic panels
low-maintenance sound absorption panels
fire-rated and safety-compliant panels
fabric wrapped fiberglass acoustic panels for commercial spaces
custom decorative acoustic panels for offices
designer fabric wrapped panels for architectural projects
sound absorption panels for improved speech clarity
custom color acoustic panels for interior design
impact-resistant fabric wrapped panels for high-traffic areas