Publiceer je producten
VORT HRW 30 MONO EVO
Vortice

VORT HRW 30 MONO EVO

Decentralized heat recovery unit. Particularly suitable for installation in residential and commercial premises of new buildings or those subject to renovation for energy efficiency. Ideal, as well as to ensure proper air exchange, also to prevent excess humidity in the room and mold growth on the walls.

Specificatie
  • Shockproof and anti-UV plastic resin structure.
    • Nominal diameter: 100 mm.
    • Ceramic exchanger with hexagonal cells. High heat exchange efficiency (up to 90% at minimum airflow).
    • Wi-Fi module capable of establishing the communication between products through a local “mesh” network, allowing a coordinated functioning and a correct indoor ventilation.
    • High efficiency EC motor fan; five operating speeds, to maximize performance when needed, or to minimize noise and consumption.
    • Integrated relative humidity probe.
    • One-way remote control that allows to set parameters or to view useful product information. In detail:
    • to switch on/off the machine,
    • to select the operating mode (4 different choices),
    • to set fan speed,
    • to select the relative humidity threshold value that activates the Boost speed (three pre-defined levels that can be set at 50%, 65% and 80%),
    • to activate “Night Mode”,
    • to show filter status.
    • Five different operating modes:
    • Continuous ventilation with heat recovery: the product cyclically extracts and introduces air to and from the room, recovering the energy stored in the exchanger;
    • Ventilation with air extraction only: stale air is extracted from the environment;
    • Ventilation with air intake only: the product introduces fresh air into the environment;
    • Automatic ventilation: the heat recovery unit automatically manages the airflows based on the relative humidity sensor readings;
    • “Night” ventilation: when the light in the room goes down, the product automatically forces the fan to run at minimum speed, regardless of the relative humidity values detected.
    • Two air filters, a 65% IsoCoarse and a pre-filter for dust, both easily removable for washing.
    • Mechanical quick closing system of the air delivery integrated into the product chassis.
    • External rubber grille, which can be installed from the outside using plugs or from the inside, through the hole in the wall.
    • Insect mesh, which can be installed into the duct from inside.

Technische specificatie
  • Unieke ref.12434-12436-12443
  • ProductfamilieResidential ventilation
  • ProductgroepHeat recovery units
  • TypeVerzameling (meerdere objecten)
  • Publicatiedatum2025-06-26
  • Editienummer1
Gerelateerd
  • HoofdmateriaalABS
  • Secundair materiaalPolypopyleen
  • Ontworpen inItalië
  • Gefabriceerd inItalië
Classificatie
  • Categorie BIMobjectHVAC-apparatuur - Warmte-terugwininstallatie
  • IFC-classificatieWarmte-terugwininstallatie (lucht/lucht)

Beschikbaarheid regio

Azië Europa Oceanië Afrika Zuid-Amerika Noord Amerika
Azerbeidzjan
Albanië
Australië
Algerije
Bolivia
Costa Rica
Bahrein
België
Nieuw-Zeeland
Burkina Faso
Chili
Panama
China
Bosnië en Herzegovina
Djibouti
Ecuador
Verenigde Staten
Filipijnen
Bulgarije
Egypte
Georgië
Cyprus
Ethiopië
Hongkong
Denemarken
Kameroen
India
Duitsland
Kenia
Indonesië
Estland
Libië
Iran
Finland
Madagaskar
Israël
Frankrijk
Mauritius
Jordanië
Griekenland
Nigeria
Kazachstan
IJsland
Tunesië
Koeweit
Italië
Zambia
Libanon
Kroatië
Zuid-Afrika
Maleisië
Litouwen
Mongolië
Malta
Qatar
Moldavië
Singapore
Montenegro
Sri Lanka
Nederland
Turkije
Noord-Macedonië
Turkmenistan
Noorwegen
Verenigde Arabische Emiraten
Oekraïene
Vietnam
Oostenrijk
Polen
Portugal
Roemenië
Rusland
Servië
Slovenië
Slowakije
Spanje
Tsjechië
Verenigd Koninkrijk
Wit-Rusland
Zweden
Zwitserland