Publiceer je producten
RO-E - Reverse Osmosis
RO-E - Reverse Osmosis
    Condair

    RO-E - Reverse Osmosis

    Reverse osmosis (RO) is an effective and economic way of removing minerals from water. The Condair RO-E has been developed specifically to provide operational, energy and maintenance benefits to Condair humidifiers.

    By removing the minerals from a humidifier’s supply water, the limescale that builds-up in the system is virtually eliminated. This results in a much lower level of required maintenance in all types of humidifier and reduced energy consumption in steam humidifiers.

    Steam humidifiers that run on mains water need to drain their boiling chambers occasionally to maintain a low mineral content and reduce limescale build-up. By using RO supply water, the steam humidifier’s boiling chamber does not require this regular drain. Therefore it uses less energy to maintain the water’s temperature.

    As the water temperature is consistent, the steam output is also consistent, thus improving humidity control. By using resistive steam humidifiers fed by RO water, ±1%RH control can be achieved.

    Other benefits of using RO water with humidifiers include increasing the life of the evaporative pads in evaporative humidifiers and preventing dust carry-over in spray humidifiers.

    Specificatie
    • Condair RO-E 

      • Voltage: 230V 
      • Frequency: 50 Hz


      Options:

      • All models show the optional housing cover


      Version:

      • Version + is for use with adiabatic humidifiers
      • Models with safety valve are mandatory for CE markets. Note: RO-E 200 and 300 require the safety valve by the external pressure tank. Please consider the instruction in the installation manual! 


      RO-E 40

      Pure water output at 5 °C water temperature against 1 bar: 58 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 98 l/hr


      RO-E+ 40 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 36 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 59 l/hr


      RO-E 100

      Pure water output at 5 °C water temperature against 1 bar: 105 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 181 l/hr


      RO-E+ 100 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 67 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 114 l/hr


      RO-E 200

      Pure water output at 5 °C water temperature against 1 bar: 200 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 352 l/hr


      RO-E+ 200 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 124 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 218 l/hr


      RO-E 300

      Pure water output at 5 °C water temperature against 1 bar: 285 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 513 l/hr


      RO-E+ 300 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 171 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 312 l/hr

    Technische specificatie
    • Unieke ref.condair-ro-e
    • ProductfamilieWater Treatment
    • ProductgroepReverse Osmosis
    • TypeObject (enkelvoudig object)
    • Publicatiedatum2025-10-02
    • Editienummer1
    • Hoogte (mm)792
    • Breedte (mm)587
    • Diepte (mm)484
    Gerelateerd
    • HoofdmateriaalStaal met poedercoating
    • Ontworpen inZwitserland
    • Gefabriceerd inDuitsland
    Classificatie
    • Categorie BIMobjectHVAC-apparatuur - Luchtbehandeling
    • IFC-classificatieFilter
    • Uniclass 2015-codePr_60_55_97_72
    • Uniclass 2015-beschrijvingReverse osmosis units
    • OmniClass-nummer23-39 41 13 15
    • OmniClass-titelReverse Osmosis and Nanofiltration Membrane Equipment

    Beschikbaarheid regio

    Zuid-Amerika Europa Oceanië Azië Afrika
    Argentinië
    België
    Australië
    China
    Zuid-Afrika
    Chili
    Bulgarije
    Nieuw-Zeeland
    India
    Uruguay
    Denemarken
    Indonesië
    Duitsland
    Israël
    Estland
    Pakistan
    Finland
    Singapore
    Frankrijk
    Thailand
    Griekenland
    Turkije
    Hongarije
    Ierland
    IJsland
    Italië
    Kroatië
    Letland
    Litouwen
    Nederland
    Noorwegen
    Oekraïene
    Oostenrijk
    Polen
    Portugal
    Roemenië
    Servië
    Slovenië
    Slowakije
    Spanje
    Tsjechië
    Verenigd Koninkrijk
    Zweden
    Zwitserland
    Common.Footer.ValueProp.Image.AltText

    Design-app voor Revit

    Laad families rechtstreeks in je Revit-model met één klik.

    Vind een plek om eenvoudiger toegang te krijgen tot nieuwe objecten, sla je Revit-families op en werk samen met je team.

    • VinkjeWerk rechtstreeks met BIM-objecten naast Revit
    • Vinkje 2 GB cloudopslag - sla uw Revit-content op
    • Vinkje Krijg belichaamde koolstof-LCA (A1-A3) rechtstreeks vanuit Revit