Publiceer je producten
Armatherm™ 500 Series Parapet Roof Penetration (US)
Armatherm™ 500 Series Parapet Roof Penetration (US)
Armatherm™ 500 Series Parapet Roof Penetration (US)
Armatherm™ 500 Series Parapet Roof Penetration (US)
Armatherm™ 500 Series Parapet Roof Penetration (US)
Armatherm™ 500 Series Parapet Roof Penetration (US)
Armatherm™ 500 Series Parapet Roof Penetration (US)
Armatherm™ 500 Series Parapet Roof Penetration (US)
Armatherm™ 500 Series Parapet Roof Penetration (US)

    Armatherm™ 500 Series Parapet Roof Penetration (US)

    Armatherm™ 500 - Parapet Roof Penetration

    Reducing heat flow within a building’s thermal envelope reduces energy consumption as well as potential condensation issues. Armatherm™ 500 thermal break material (TIM) significantly reduces energy lost from thermal bridging in building envelope connections.

    Armatherm™ 500 structural thermal break material is a high density, thermoset polyurethane manufactured in several densities.

    Armatherm™ 500 thermal break material can support high loads and has a selection of four grades of material with different compressive strength capabilities.

    The Armatherm™ 500 thermal insulation blocks have very limited creep under load, plus they do not absorb water because of their closed cell structure. Therefore, energy lost via thermal bridging is reduced within building envelope connections. Heat flow, energy consumption and potentially dangerous condensation issues are all minimised as a result.

    The standard thicknesses Armatherm™ 500 is available in are 5mm, 10mm, 12mm, 15mm, 20mm, 25mm, 50mm. Furthermore, the high density, polyurethane material sheets can be layered or customised with ease to achieve the desired U value and thickness specifications. It is extremely dynamic and can be used across the building, wherever features a penetration or transition exit through a building envelope. It can be cut and drilled on site easily, where a thermal bridge occurs, if necessary. Armatherm™500-320 and Armatherm ™500-490 are the most common specifications.

    Not only is Armatherm™500 the ideal solution to prevent thermal bridging in buildings to reduce heat loss, it is also suitable for cold storage facilities to prevent the subgrade from freezing. This is necessary for frozen food storage, Armatherm™500 sits directly under the column base to prevent the transfer of cold temperatures into the ground.

    Parapet Roof Penetration Thermal Bridging Solution

    Roof to wall and parapet locations require structural framing for support which prevents continuous insulation from roof to facade. This creates a thermal bridge which can be prevented by providing an Armatherm™ 500 series structural thermal break under the parapet connecting the facade and roof insulation and improving the effective R value by as much as 30%. A thermal break can also be installed within the envelope at roof penetration points where structural elements are supported. This provides continuous insulation and prevents potential condensation issues.


    Specificatie
    • Parapet Roof Penetration Thermal Bridging Solution

      Specifications of Armatherm™ 500 Series 500-080 500-150 500-200 500-280
      Compressive Strength (psi) 210 560 1100 2150
      Compressive Modulus (psi) 6155 18130 29000 49300
      Sheer strength (psi) 145 167 257 310
      Thermal Conductivity (BTU in/hr ft 2F) 0.26 0.32 0.39 0.53
      R Value per Inch 3.85 3.1 2.6 1.9
      Operating Temperature (°F) -300 -300 -300 -300


      thermal break, balcony, parapet, column base, shelf angle, curtain wall, insulation pad, structural thermal break, Armatherm, thermal bridging, psi-value, U-value, energy code, envelope detailing

    Technische specificatie
    • Unieke ref.armatherm-500-Parapet-Roof-Penetration-Thermal-Bridging-Solution-US
    • ProductfamilieArmatherm™ 500
    • ProductgroepStructural Thermal Break
    • TypeBouwmateriaal
    • Publicatiedatum2024-11-25
    • Editienummer1
    Gerelateerd
    • HoofdmateriaalPolyurethaan
    • Ontworpen inVerenigde Staten
    • Gefabriceerd inVerenigde Staten
    Classificatie
    • Categorie BIMobjectBouwmaterialen - Isolatie
    • IFC-classificatieBouwkundige aansluiting
    • ETIM-codeEC000406
    • ETIM-naamThermal insulation
    • UNSPSC-naamThermal insulation
    • UNSPSC-code301415
    • Uniclass 2015-codePr_35_90_15_89
    • Uniclass 2015-beschrijvingThermal break connection plates
    • CSI MasterFormat 2014 Code07 21 00
    • CSI MasterFormat 2014 TitelThermal Insulation
    • OmniClass-nummer23-13 25 19
    • OmniClass-titelThermal Insulation 

    Beschikbaarheid regio

    Noord Amerika Zuid-Amerika
    Amerikaanse Maagdeneilanden
    Argentinië
    Anguilla
    Bolivia
    Antigua en Barbuda
    Brazilië
    Aruba
    Chili
    Bahama's
    Colombia
    Barbados
    Ecuador
    Belize
    Falklandeilanden (Islas Malvinas)
    Bermuda
    Frans-Guyana
    Britse Maagdeneilanden
    Guyana
    Canada
    Paraguay
    Caribisch Nederland
    Peru
    Costa Rica
    Suriname
    Cuba
    Uruguay
    Curaçao
    Venezuela
    Dominica
    Dominicaanse Republiek
    El Salvador
    Grenada
    Groenland
    Guadeloupe
    Guatemala
    Haïti
    Honduras
    Jamaica
    Kaaimaneilanden
    Martinique
    Mexico
    Montserrat
    Nicaragua
    Panama
    Porto Rico
    Saint Kitts en Nevis
    Saint Martin
    Saint Vincent en de Grenadines
    Saint-Barthélemy
    Saint-Pierre en Miquelon
    SaintLucia
    Sint Maarten
    Trinidad en Tobago
    Turks- en Caicoseilanden
    Verenigde Staten