Publiceer je producten
Stainless Steel Reduced Pressure Zone Assembly Backflow Preventers with Flood Sensor, 2 1/2 - 10 Inch Sizes - C400-FS
Stainless Steel Reduced Pressure Zone Assembly Backflow Preventers with Flood Sensor, 2 1/2 - 10 Inch Sizes - C400-FS
Stainless Steel Reduced Pressure Zone Assembly Backflow Preventers with Flood Sensor, 2 1/2 - 10 Inch Sizes - C400-FS

    Stainless Steel Reduced Pressure Zone Assembly Backflow Preventers with Flood Sensor, 2 1/2 - 10 Inch Sizes - C400-FS

    Series C400 reduced pressure zone assemblies feature a flood sensor with SentryPlus Alert® technology to detect excessive water discharges from the relief valve. Activated through an add-on connection kit, the sensor can trigger the alert system sending notification of flood detection to facility personnel. Connection kits are available for BMS and cellular communication.

    This series prevents the reverse flow of contaminated water caused by backsiphonage or backpressure from entering the potable water supply. Ideal for protection at health hazard cross-connections or for containment at the service line entrance. Its compact modular design facilitates maintenance and assembly access. Check with local water authorities for installation requirements.

    The TS-OSY model is equipped with a factory installed, durable, and robust supervisory switch (UL Certified, Safety Signaling, Control No. 3L38) for tamper detection. The alert sounds when attempts are made to remove the switch from the gate valve or to close the valve. Wiring of the supervisory switch to a fire alarm control panel is required.

    Specificatie
    • Features

      • Sensor on the relief valve for flood detection
      • Protects against backsiphonage, backpressure, and the fouling of either check valve
      • Stainless steel body construction, sleeve and torsion spring check valves
      • Extremely compact design is significantly lighter than traditional designs
      • Patented link check modules provide low pressure loss
      • Entire valve body and closure sleeve manufactured from 304 stainless steel
      • Flood alert feature activated with add-on connection kit, compatible with BMS and cellular communication
      • Integrated supervisory switch (UL Certified, Safety Signaling, Control No. 3L38) on outside stem and yoke resilient seated gate valve
    Technische specificatie
    • Unieke ref.c400-fs
    • ProductfamiliePlumbing & Flow Control Solutions
    • ProductgroepBackflow Prevention
    • TypeObject (enkelvoudig object)
    • Publicatiedatum2024-02-13
    • Editienummer1
    Gerelateerd
    • HoofdmateriaalRoestvrij staal
    • Ontworpen inVerenigde Staten
    • Gefabriceerd inVerenigde Staten
    Classificatie
    • Categorie BIMobjectLoodgieterswerk - Kleppen
    • IFC-classificatieKlep
    • UNSPSC-naamValves
    • UNSPSC-code401416
    • Uniclass 2015-codePr_65_54_40_62
    • Uniclass 2015-beschrijvingPlastics isolating valves
    • CSI MasterFormat 2014 Code40 05 67
    • CSI MasterFormat 2014 TitelSpecialized Pressure and Flow-Control Valves
    • OmniClass-nummer23-27 31 00
    • OmniClass-titelValves
    • CSI UniFormat II-codeC1030
    • CSI UniFormat II-titelFittings

    Beschikbaarheid regio

    Noord Amerika
    Canada
    Verenigde Staten