Publiceer je producten
Acousti-Board Ultra - Natural Fiber Soundproof Backer and Tackboard

Acousti-Board Ultra - Natural Fiber Soundproof Backer and Tackboard

Acousti-Board Ultra™ Soundproof Backer
A Sustainable, Natural Fiber Drywall Backer Board

Acousti-Board Ultra™ is a cost-effective, sustainable solution for enhancing acoustic performance of wall assemblies. Made from 50% pre-consumer recycled synthetic fiber, this sound-dampening backer adds density and acoustic mass to wall systems—helping reduce airborne sound transmission while staying concealed behind the finished surface.

Tackable, lightweight, and easy to install, Acousti-Board Ultra™ is typically applied directly to studs using finish nails before drywall installation. It’s an ideal choice for projects requiring an unobtrusive sound control layer with sustainability at its core.

Key Benefits:

  • Contributes to greener building practices
  • Enhances STC performance of wall assemblies
  • Economical and efficient
  • Tackable surface for added functionality when used behind stretched fabric as a wall panel or tack board
  • Simple installation with conventional tools

Achieve better acoustics and meet environmental goals—without compromising design intent.

Specificatie
  • SECTION 09 84 33

    Acousti-Board Ultra Soundproofing Backer Wall Panels

    PART 1 GENERAL

    1. SECTION INCLUDES
      1. Acousti-Board Ultra soundproofing backer wall panels.
    2. REFERENCES
      1. American Society for Testing and Materials (ASTM)
        1. ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
        2. ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials.
        3. ASTM E90: Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements.
        4. ASTM E795: Standard Practices for Mounting Test Specimens During Sound Absorption Tests
      2. International Code Council (ICC)
        1. ICC IBC: International Building Code
    3. SUBMITTALS
      1. Product Data: Manufacturer’s data sheet and installation instructions.
      2. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified acoustical panel.
      3. Test Reports: Upon request, submit certified test reports to verify specified product performance.
    4. MAINTENANCE MATERIAL
    5. Extra Materials:
      1. Deliver no less than two percent (2%) / (Other) of each type, color and pattern of material.
      2. Extra materials shall be from the same production run as the original materials.
      3. Extra materials shall remain in the manufacturer’s original packaging and given to the building owner upon substantial completion of the work. Store extra materials per instructions as described in storage and handling requirements.
    6. QUALITY ASSURANCE
      1. Qualifications:
        1. Manufacturers: Provide acoustical wall panels from a single manufacturer.
        2. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
      2. Performance Requirements:
        1. Surface Burning Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM E84. Acoustical panel surface burning performance should comply with the International Building Code and other local building code requirements.
        2. Acoustical Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM C423 and ASTM E90.
    7. DELIVERY, STORAGE, AND HANDLING
      1. Storage and Handling Requirements:
        1. Handle panels carefully to avoid any damage.
        2. Store panels indoors in a clean, cool, dry place, and out of direct sunlight.
        3. Store panels in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
    8. SITE CONDITIONS
      1. Ambient Conditions:
        1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
        2. Do not install products under environmental conditions outside manufacturer’s recommended limits.
      2. Existing Conditions: Do not install wall panels until space is enclosed and weather proofed, and wet work is completely dry.
    9. WARRANTY
      1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

    PART 2 PRODUCTS

    (Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional Acousti-Board Ultra information can be found on our website

    1. MANUFACTURERS
      1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
        Phone: 952-448-5300. Fax: 952-448-2613. Website:
    2. DESCRIPTION
      1. Product: Acousti-Board Ultra soundproofing backer wall panels by Acoustical Surfaces, Inc.
      2. Products Options:
        1. Panel Composition: 50% pre-consumer recycled synthetic fiber
        2. Panel Density: 13 lb pcf
        3. Panel Thickness: 1/2" ± 1/16”
        4. Panel Size: (2’ x 4’) / (4’ x 8’)
        5. Edge Detail: Square
        6. Mounting Method: (Adhesive) / (Mechanical Fastener)
      3. Product Performance:
        1. Acoustical Performance
          1. Noise Reduction Coefficient (NRC) per ASTM C423 – 0.50
          2. Sound Transmission Class (STC) per ASTM E90 – 15
        2. Surface Burning Performance
          1. Fire Rating per ASTM E84: Class A.

    PART 3 EXECUTION

    1. EXAMINATION
      1. Verification of Conditions:
        1. Examine surfaces scheduled to received furred out or directly attached acoustical units for unevenness, irregularities or dampness that would affect quality and execution of work.
        2. All wet work in the installation area must be complete, cured, and dry prior to installation.
        3. Wall assembly shall be complete, inspected, and accepted before wall work begins.
    2. INSTALLATION
    3. Comply with manufacturer’s instructions and recommendations for installation of wall panels and with industry standards.
    4. CLEANING
    5. Clean surfaces of wall panels per manufacturer’s instructions or recommendations.
    6. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
    7. PROTECTION
    8. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

    END OF SECTION

Technische specificatie
  • Unieke ref.acoustical-surfaces-acousti-board
  • ProductfamilieSoundproofing Backer Board
  • ProductgroepSoundproofing Products
  • TypeObject (enkelvoudig object)
  • Publicatiedatum2011-04-21
  • Editienummer1
  • Hoogte (inch)96
  • Breedte (inch)48
  • Diepte (inch)0.5
Gerelateerd
  • HoofdmateriaalCellulose
  • Ontworpen inVerenigde Staten
  • Gefabriceerd inVerenigde Staten
  • Nettogewicht (lbs)20
Classificatie
  • Categorie BIMobjectBouwmaterialen - Akoestische panelen & accessoires
  • IFC-classificatieWall
  • ETIM-codeEG000006
  • ETIM-naamInstallation ducts for wall and ceiling
  • Uniclass 2015-codeAc_40_65_79
  • Uniclass 2015-beschrijvingSound controlling
  • CSI MasterFormat 2014 Code09 81 13
  • CSI MasterFormat 2014 TitelAcoustic Board Insulation
  • OmniClass-nummer23-15 13 19 35
  • OmniClass-titelAcoustical Wall Treatment

Beschikbaarheid regio

Noord Amerika
Amerikaanse Maagdeneilanden
Anguilla
Antigua en Barbuda
Aruba
Bahama's
Barbados
Belize
Bermuda
Britse Maagdeneilanden
Canada
Caribisch Nederland
Costa Rica
Cuba
Curaçao
Dominica
Dominicaanse Republiek
El Salvador
Grenada
Groenland
Guadeloupe
Guatemala
Haïti
Honduras
Jamaica
Kaaimaneilanden
Martinique
Mexico
Montserrat
Nicaragua
Panama
Porto Rico
Saint Kitts en Nevis
Saint Martin
Saint Vincent en de Grenadines
Saint-Barthélemy
Saint-Pierre en Miquelon
SaintLucia
Sint Maarten
Trinidad en Tobago
Turks- en Caicoseilanden
Verenigde Staten