제품 게시
Z1201-H EZCarry® High Performance Adjustable Horizontal Siphon Jet Hub and Spigot Water Closet Carrier System
Z1201-H EZCarry® High Performance Adjustable Horizontal Siphon Jet Hub and Spigot Water Closet Carrier System
Z1201-H EZCarry® High Performance Adjustable Horizontal Siphon Jet Hub and Spigot Water Closet Carrier System
Z1201-H EZCarry® High Performance Adjustable Horizontal Siphon Jet Hub and Spigot Water Closet Carrier System
    Zurn

    Z1201-H EZCarry® High Performance Adjustable Horizontal Siphon Jet Hub and Spigot Water Closet Carrier System

    EZCarry® horizontal siphon jet water closet carrier system with high performance waterway and 4” [102mm] hub and spigot connections. System includes Dura-Coated cast iron main fitting with hydro-mechanically optimized sweep and extended 2” [51mm] vent, adjustable faceplate, QuickFit™ faceplate gasket, floor mounted pre-fab slotted foot supports with top anchoring pre-fab support base, heavy-duty 1/2” [13mm] rear anchor tie down, fixture bolts, trim, stud protectors, bonded “Neo-Seal” gasket, and corrosion resistant, adjustable 3” [76mm] dia. X 6” [152mm] coupling with integral test cap designed to increase flow velocity and line carry. EZCarry® system complies with the requirements of ASME A112.6.1M up to a 500 lbs [227 kg] static load rating.

    Compliance:

    • ASME A112.6.1M

    Features:

    • Propel waste up to three times farther, reducing the possibility of low-flow system clog for overall plumbing system protection
    • Protect facilities from excessive loading with standard system design for loading up to 500 lb.
    • Install faster with labor saving features on a 30% lighter system
    • Reduce maintenance emergencies with carriers designed to optimize waste line carry
    • Maintain a sanitary environment with wall-mounted fixture
    • Test the system and cut the coupling to length from the front with Zurn's patent-pending EZ-SET™ coupling option
    • Reduce adjustment time with factory-assembled trim and universal feet pre-set at 5-1/2" rough-in height

    Additional Model Available

    Z1201-HL4, Z1201-HR4

    Keywords: Horizontal Siphon Jet Hub, Siphon Jet Hub, Water Closet Carrier, EZCarry system, low-flow system clog, plumbing system, sanitary environment, wall-mounted fixture, spigot connections, Dura-Coated cast iron, gasketed faceplate, fixture bolts, trim, stud protectors, Neo-Seal gasket, corrosion resistant, cast iron face plate, support legs, waste fitting, rear anchor assembly, polymer coupling, Facility Sanitary Sewerage, Building Services Piping, Pipe Fitting Gaskets, Neo-Seal Gasket Kit

    사양

    기술 사양
    • 특징 참조zurn-z1201-h
    • 제품군Carriers & Fixture Supports
    • 제품분류Water Closet & Toilet Carriers
    • 유형개체 (단일 개체)
    • 게시일2018-08-02
    • 에디션 넘버3
    • 높이(인치)12
    • 너비(inches)9
    • 깊이(inches)12
    관련성
    • 주 재료Cast iron
    • 부 재료단소강
    • 설계국가미국
    • 순 중량(Lbs)64
    분류
    • BIMobject 카테고리배관 - 배수
    • IFC 분류위생 터미널
    • ETIM 코드EC011338
    • ETIM 이름Accessories for double wall/built-in element sanitary
    • Uniclass 2015 코드Pr_20_85_09_96
    • Uniclass 2015 설명Wall-hung WC support brackets
    • CSI 마스터 형식 2014 코드22 42 13.13
    • CSI 마스터 형식 2014 제목Commercial Water Closets
    • OmniClass 번호23-31 19 19
    • OmniClass 제목Water Closets 

    지역 가용성

    북미
    과들루프
    과테말라
    그레나다
    그린란드
    네덜란드령 카리브 해 지역
    니카라과
    도미니카
    도미니카 공화국
    마르티니크
    멕시코
    몬세라트
    미국
    미국령 버진아일랜드
    바베이도스
    바하마
    버뮤다
    벨리즈
    생마르탱
    생바르텔레미
    생피에르앤드미클롱
    세인트루시아
    세인트빈센트그레나딘
    세인트키츠네비스
    신트마르턴
    아루바
    아이티
    앤티가 바부다
    앵귈라
    엘살바도르
    영국령 버진아일랜드
    온두라스
    자메이카
    캐나다
    케이맨 군도
    코스타리카
    쿠바
    퀴라소
    터크스케이커스 제도
    트리니다드토바고
    파나마
    푸에르토리코