제품 게시
ZF1201-U( )4-F_ One-Piece Faceplate Carrier System
ZF1201-U( )4-F_ One-Piece Faceplate Carrier System
    Zurn

    ZF1201-U( )4-F_ One-Piece Faceplate Carrier System

    EZCarry® one-piece combination floor mounted foot/faceplate horizontal siphon jet system supplied for ( ) rough-in height features high performance Dura-Coated cast iron main fitting with hydro-mechanically optimized sweep, 3” [76mm] no-hub connections, and extended 2” [51mm] vent. Faceplate enables prefabrication with strut channel or angle iron. Corrosion resistant adjustable 3” [76mm] diameter x 6” [152mm] coupling with integral test cap is designed to increase flow velocity and line carry. Labor saving Neo-Seal bonded gasket optimizes flow performace while reducing installation steps. Complete system includes one-piece combination foot/faceplate, heavy-duty 1/2” [13mm] rear anchor tie down (optional dependent on installation method, see intallation instructions), fixture bolts, trim and stud protectors. EZCarry® one-piece combination floor mounted foot/faceplate system complies with all applicable requirements of ASME A112.6.1M up to a 500 lb maximum static load.

    Compliance:

    Massachusetts Approved, ASME, UPC, IPC, NPCC

    Features:

    • One-piece faceplate set to rough-in heights with no complicated vertical adjustments required
    • Provides top and bottom connection points for common prefabrication methods
    • Multiple secure mounting options and machine threaded holes to prevent separation from the carrier during transportation
    • No rear anchor attachment is required to meet load requirements in most installations
    • 500 lb max static load per ASME 112.6.1M
    • Multiple secure mounting options and machine threaded holes to prevent separation from the carrier during transportation
    • No rear anchor attachment is required to meet load requirements in most installations
    • EZCarry hydraulically optimized waterway and sweep propels waste further to virtually eliminate clogging and downtime

    Models Available

    ZF1201-UL4-F55 / ZF1201-UL4-F75 | ZF1201-UR4-F55 / ZF1201-UR4-F75 | ZF1201-UD4-F75-A | ZF1201-UL4-F75-A-JC | ZF1201-UR4-F75-A-JC

    Keywords: strut channel, prefabrication, Water Closet Carrier System, CARRIER SYSTEM, prefabrication construction, EZCarry, FACEPLATE CARRIER SYSTEM, One-Piece Faceplate, carrier assemblies, ONE PIECE FACEPLATE, Flexible Prefabrication, vertical adjustments, ONE PIECE footplate

    기술 사양
    • 특징 참조ZF1201-U
    • 제품군Carriers & Fixture Supports
    • 제품분류Water Closet & Toilet Carriers
    • 유형개체 (단일 개체)
    • 게시일2023-05-22
    • 에디션 넘버3
    • 높이(인치)5.5
    • 너비(inches)18
    • 깊이(inches)17
    관련성
    • 주 재료Cast iron
    • 부 재료ABS
    • 설계국가미국
    • 순 중량(Lbs)68
    분류
    • BIMobject 카테고리배관 - 배수
    • IFC 분류위생 터미널
    • ETIM 코드EC011338
    • ETIM 이름Accessories for double wall/built-in element sanitary
    • Uniclass 2015 코드Pr_20_85_09_96
    • Uniclass 2015 설명Wall-hung WC support brackets
    • CSI 마스터 형식 2014 코드22 42 13.13
    • CSI 마스터 형식 2014 제목Commercial Water Closets
    • OmniClass 번호23-31 19 19
    • OmniClass 제목Water Closets 

    지역 가용성

    북미
    과들루프
    과테말라
    그레나다
    그린란드
    네덜란드령 카리브 해 지역
    니카라과
    도미니카
    도미니카 공화국
    마르티니크
    멕시코
    몬세라트
    미국
    미국령 버진아일랜드
    바베이도스
    바하마
    버뮤다
    벨리즈
    생마르탱
    생바르텔레미
    생피에르앤드미클롱
    세인트루시아
    세인트빈센트그레나딘
    세인트키츠네비스
    신트마르턴
    아루바
    아이티
    앤티가 바부다
    앵귈라
    엘살바도르
    영국령 버진아일랜드
    온두라스
    자메이카
    캐나다
    케이맨 군도
    코스타리카
    쿠바
    퀴라소
    터크스케이커스 제도
    트리니다드토바고
    파나마
    푸에르토리코