BIM 객체 - 무료로 다운로드하세요! Awning window system FSM with cable guidance

Awning window system FSM with cable guidance

Cable-guided awning window systems are a textile, external sun shading system with awning fabric that is wound and unwound on a shaft. The lateral guidance uses slender tension cables in which the awning fabric is guided with the end rail. The awning fabric is premounted in a flat aluminium cover panel in a folded design. Optimised for integration into exterior insulation and finish systems, this solution can also be located visibly in front of the window or facade.

Visually slight

Effective building shading with a light appearance: Awning window systems are a weather-proof, external sun shading system with awning fabric that is wound and unwound on a shaft. The lateral guidance uses slender cables in which the awning fabric is guided with the end rail

Space-saving

The cable guidance saves space and can be integrated into almost any facade: The slender, lateral tension cables reliably guide the awning fabric over the end rail.

Quiet

The tension spring moderates short-term wind loads on the awning fabric and tension cable and reduces any noise development.

Widely applicable

Flexible: The high-quality sun shading system is used inside the exterior insulation and finish system, but can also be integrated into existing shafts or visibly attached to the reveal.

Seamless

Low installation depth: The aluminium cover panel is matched to the dimensions of the awning fabric, including the end rail, and is discreetly integrated into the structure. The end rail retracts completely into the cover panel to create a beautiful appearance. The plug-in connector disappears into the cover panel.

WAREMA offers you a rigid model on BIMobject. Discover our configurable models at mywarema.com/home, which can be perfectly adjusted to your individual needs.

사양

Building limits:
Order width mx 3000 mm
Order height mx 3000 mm
Keyfacts:
- Slender cable guidance
- Folded cover panel
- Cover panel fixing via bracket