제품 게시
Triad Hot Water Firetube Boiler
Superior Boiler

Triad Hot Water Firetube Boiler

General Description

The Hot Water Triad is a complete UL listed package that is a ready-to-install system featuring a perfectly matched powerful and efficient burner/boiler combination. Hot Water Triads can be configured for Space Heat, Domestic Hot Water, or Combination Applications. Combination applications are ready-to-install packaged systems that provide Domestic Hot Water and Space Heating from one vessel.

Features

  • Manufactured to exceed ASME Section IV standards
  • Typically is used to provide supply temperatures from the coil of between 140-180°F, yet can accept extremely low return temperatures (below 100°F) without shocking the boiler
  • Include vertical firetubes with a 2″ diameter, 12 gauge steel and fitted with a high-efficiency turbulator for maximum heat transfer.
  • The combustion chamber is fully water-backed, with burners that are UL listed.

Construction

  • Standard features include nationally known parts and controls that are quickly available at most supply houses, allowing for easy quick and easy repair and maintenance, which can dramatically reduce down time.
  • Main and Auxiliary Gas Valves
  • Air Flow Switch
  • Flame Safeguard
  • Manual Main, Leak Test, and Pilot Gas Shutoff Valves
  • Bell and Gossett Circulating Pump
  • Honeywell Aquastat Relay
  • Automatic Low Water Cutoff
  • Honeywell Second High-Limit With Manual Reset
  • Burner Control Relay
  • High Visibility Operating Light
  • Pressure/Temperature Gauge
  • Pressure Relief Valve
  • 2″ Diameter Firetubes of SA178-A Steel
  • Rail Legs
  • Lifting Lugs
  • 1.5 Inches of Insulation With a Painted Steel Jacket
  • Choice of single or dual fuel burners from a variety of manufacturers
  • Spark Ignition System for Combination Fuel Burners
  • Low-High-Low and Modulating gas trains
  • CSD-1, IRI, FM Low-High-Low and Modulating Gas Trains with Motorized Valves
  • Fan-Damper relays
  • Louver Box for Sealed Combustion Side-Wall Venting
  • Barometric Dampers and Galvanized Tees
  • Extra Clean-out Openings and Plugs
  • Microprocessor Control Panel
  • Factory built Primary Mains and Headers
  • Immersion Aquastats
  • Various Relief Valve sizes for different applications

Safety

A well-made, rugged vessel is naturally a safer boiler. But Superior’s Hot Water Triads also have a firebox design that is completely backed by water, along with safety controls on the boiler that results in a very safe and secure package.

사양
  • Capacity: 7 - 48 HP

    Fuel Capabilities: #2 Oil, Hydrogen, Natural Gas, Propane

    Tube Type: Smooth Tubes with Turbulators

    Hot Water Design Pressure: 30 - 125 psig

기술 사양
  • 특징 참조triad-hot-water-firetube-boiler
  • 제품군Boilers
  • 제품분류Vertical Firetubes
  • 유형개체 (단일 개체)
  • 게시일2025-08-15
  • 에디션 넘버1
관련성
  • 설계국가미국
  • 제조국가미국
분류
  • BIMobject 카테고리HVAC - 보일러
  • IFC 분류보일러
  • ETIM 코드EG015210
  • ETIM 이름Boilers and heaters
  • Uniclass 2015 코드Pr_60_60_08
  • Uniclass 2015 설명Boilers
  • CSI 마스터 형식 2014 코드23 52 00
  • CSI 마스터 형식 2014 제목Heating Boilers
  • OmniClass 번호23-33 11 21
  • OmniClass 제목Water Tube Boilers

지역 가용성

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코
Common.Footer.ValueProp.Image.AltText

Revit용 Design App

한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

  • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
  • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
  • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득