Volet Roulant Traditionnel Presto Pour Coffre Tunnel

Find in the section « Download » every usefull informations for your project : technical drawings, data sheet, notice, downloading procedure of the « Vent & Volet » mobile app, argumentary of the connected general remote control Calyps’HOME®.

Traditional roller shutter specially adapted to tunnel enclosures

• Cheek with return for fixing the underside and motor support for dismantling underneath
• Both heat shield, intrusion defense and solar protection for improved building comfort
• For safety : automatic Anti-lifting device from the outside, slides and final blade in very resistant extruded aluminum.
• Exclusive Enduro chassis tested 14,000 cycles (40 years of operation with one up and down/day)
• Automatic Locking Device (DVA) developed by Profalux
• Reduced space requirement : the winding does not extend beyond the cheek
• Self-supporting system, rests on the slides
• An aluminum axle support cheek with a section of less than 133 mm for windows and 156 mm for French doors
• Compatible with all brands of tunnel lockers
• Simplified metering, quick assembly, easy installation
• Wide choice of colors: apron to choose from the manufacturer's range. Box, runner and final slat at your choice in the manufacturer's range, in the RAL or Futura range

To know : Exists with option Mosquito Net or Mosquito Net Awning - Also available in solar operation - Compatible with a connected remote control Calyps'HOME (sold as an option) to close the shutters at the same time with a single button, even remotely - Also compatible with the BMS (Building Management System).

INSTALLATION CASE
- Installation in TUNNEL or existing TUNNEL BOX
Traditional construction with interior insulation
Possible also in Thermal Insulation from the Outside

사양

Technical specifications
Find all the technical product information in the technical data sheet available in "Download"
Product NF
Aluminium blades :
- PX39 = curved blade 39 mm Alu double-wall profile with CFC-free polyurethane foam
- PX39 Thermo-Reflex™ = 39 mm curved slat Double-walled aluminum profile with polyurethane foam with Thermo-Reflex™ winter special thermal lacquer to preserve the interior color
- PX39 ISOMAXX = curved slat 39 mm Alu double-skinned profile with polyurethane foam with Thermo-Reflex™ thermal lacquer and Beckrytherm for a double insulating effect Summer-Winter
- PX40 = flat slat 40 mm Double-walled aluminum profile with CFC-free polyurethane foam
- PX55 = 55 mm curved blade 55 mm Double-walled aluminium profile with CFC-free polyurethane foam
PVC blades :
- PVC40 : 40 mm curved blade
- PVC60: curved blade60 mm
Manoeuvres that can be done :
Radio (Profalux engine only)
Emergency maneuver
Wired (Profalux motor only)
Direct printing
Swinging rod (except PX55)
Backstage :
C48 = PX39/PX40/PVC40 blades
C63 = PVC60/PX55 slats
C62 optional
Minimum Limits :
Profalux Electric Motor without backup
LDC * mini = 405 mm (435 if slide different from C48R)
HSL* mini = 400 mm
Electric motor with emergency
LDC * mini = 557 mm
HSL* mini = 400 mm
Oscillating rod
LDC * mini = 200 mm
HSL* mini = 400 mm
PX39/PX40 direct print (max. area 5m²)
LDC * mini = 665 mm
HSL* mini = 400 mm
Limitations of use for Alu and PVC blades for Presto :
Depending on the type of blades - download the technical data sheet
Cheek section :
According to blades and dimensions - download the technical data sheet
Compatibility of Presto cheek sections for installation in Coffralux
Presto cheek section: 123 -132 -155 -170 mm => trunk section 28 or 30 mm
Cheek section 205 mm => trunk section 28 mm
Play section 230 mm => No compatibility
Note: Electrical operation WITH back-up = not feasible
Wind resistance V*3 or V*5 according to blades and / or dimensions
Please note : The mobile app « Vente & Volet » allows you to calculate in a few clicks the wind resistance class your rolling shutters, BSO or vertical stores may respect. For your project according to the DTU 34.4
* LDC = Width of the back of the slides
* HSL = Height Under Lintel