제품 게시
Roof Tile
Roof Tile
Roof Tile
Roof Tile
Roof Tile
Roof Tile
    PREFA

    Roof Tile

    별점 1.8/51.8(5 리뷰)

    Weighing just 2.3 kg/m², PREFA roof tiles are one of the most resistant roof materials that exist. Even intact older roof structures can be renovated easily and affordably with small-format aluminium tiles. Four roof tiles are sufficient to cover an entire square metre of roof surface. 

    • Available in 9 standard colours
    • Complete range of accessories
    • Alloy according to EN 1396
    • Surface treatment in a coil-coating procedure
    사양
      • Available in 9 standard colours (stucco surface)
      • Also available with a smooth finish upon request

      MATERIAL: aluminium 0.7 mm thick

      VISIBLE SIDE: Coil coating

      REAR: protective paint

      SIZE: 600 × 420 mm (cover)

      WEIGHT:1 m² = approx. 2.3 kg = 4 tiles

      ROOF PITCH:
      from 12° (rafter length: up to 7 m)
      from 14° (rafter length: up to 7-12 m)
      from 16° (rafter length: over 12 m)

      INSTALLATION: on solid sheathing (at least 24 mm); or with snow loads greater than 3.25 kN/m² (reference height for Switzerland: 925 m); or in terrain categories 0, I or II, solid sheathing with a bitumen layer is required

      FASTENING: 2 PREFA patent clips per roof tile = 8 clips per m²

    기술 사양
    • 특징 참조roof-tile
    • 제품군Roof Systems
    • 제품분류Roof Systems
    • 유형개체 (단일 개체)
    • 게시일2020-09-16
    • 에디션 넘버1
    • 높이(mm)420
    • 너비(mm)600
    관련성
    • 주 재료알루미늄
    • 설계국가오스트리아
    • 순 중량(Kg)0.575
    분류
    • BIMobject 카테고리건축 - 지붕

    지역 가용성

    유럽
    네덜란드
    노르웨이
    덴마크
    독일
    라트비아
    러시아
    뤽상부르
    리투아니아
    벨기에
    스웨덴
    스위스
    슬로바키아
    슬로베니아
    아일랜드
    에스토니아
    영국
    오스트리아
    이탈리아
    체코 공화국
    크로아티아
    폴란드
    프랑스
    헝가리
    Common.Footer.ValueProp.Image.AltText

    Revit용 Design App

    한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

    새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

    • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
    • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
    • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득