제품 게시
Nuheat Mesh Electric Floor Heating System 240V
Nuheat

Nuheat Mesh Electric Floor Heating System 240V

Mesh is an on-site adjustable "strip and roll" solution.

Mesh is best suited for square and rectangular shaped areas where some on-site flexibility is needed. The heating wire is attached to a roll of adhesive mesh material. During installation, the “roll” can be cut, turned, and adhered to the subfloor to provide floor heat in the desired areas of the room. Mesh kits comes in 32 sizes. Choose the mesh kit that is best suited for the size of the room/area and configure on-site to provide floor heat in the desired areas of the room.

As Featured on Amazon.com

사양
  • Technical Info:

    Material: Two single conductor Tefzel-coated resistance wires covered by a tin-plated copper braid and then coated with a durable copolymer (PVC) outer jacket. Heating cable is attached to a self-adhesive fiberglass mesh material.

    Operating Voltage: 240 V.

    Power Output: 12 watts per square foot.

    Maximum Continuous Exposure Temperature: 194°F (90°C). 

    Heating Cable: 2-wire, grounded, twisted pair with PVC outer jacket.

    Cold Lead: 2-wire, 18 AWG plus ground braid layer; 10 ft (3m) length.

기술 사양
  • 특징 참조Nuheat-Mesh-Electric-Floor-Heating-System-240V
  • 제품군Radiant Heat
  • 제품분류Mesh
  • 유형문서(정보)
  • 게시일2019-02-27
  • 에디션 넘버1
관련성
  • 설계국가미국
분류
  • BIMobject 카테고리바닥재 - 언더레이
  • UNSPSC 이름Heating equipment and parts and accessories
  • UNSPSC 코드401018
  • CSI 마스터 형식 2014 코드23 83 00
  • CSI 마스터 형식 2014 제목Radiant Heating Units
  • OmniClass 번호23-33 15 15
  • OmniClass 제목Specialized Surface Heating Products

지역 가용성

북미
미국
Common.Footer.ValueProp.Image.AltText

Revit용 Design App

한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

  • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
  • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
  • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득