제품 게시
EI Fire Rated Hermetic Automatic Door
Manusa

EI Fire Rated Hermetic Automatic Door

The EI 90 fire rated hermetic door ensures optimum performance in critical situations by combining durability, fire resistance and structural integritiy. Both the EI hermetic door leaf and the frame form an efficient solution that not only guarantees an airtight closure, but also a high resistance to the spread of fire and smoke, while at the same time protecting the building.
사양
  • * Fire tests in accordance with UNE EN 1634-1:2016+A1:2018 obtained on the operator side, the opening frame and the leaf. Tests carried out on the side of the operator exposed to fire and the opposite side of the operator exposed to fire. * Fire resistance up to 90 minutes with the operator's side not exposed to fire, and fire resistance up to 60 minutes with the operator's side exposed to fire. * Smoke test according to UNE EN 13501-2:2023 successfully passed, both in hot and cold smoke. * Air permeability tests, obtaining the highest certifications in this respect. * Visio+ hermetic HD operator that guarantees high levels of airtightness and incorporates IoT technology. * Single slide (left / right) and automatic closing in case of fire or alarm. * Flush mounted vision panel option (450 x 450 mm) * Pull handle (600 mm) and recessed handle on the opposite side of the operator. * HPL finish with a choice of up to 10 colors.
기술 사양
  • 특징 참조EI-fire-rated-hermetic-automatic-door
  • 제품군AUTOMATIC DOORS
  • 제품분류Hermetic Door
  • 유형개체 (단일 개체)
  • 게시일2024-11-19
  • 에디션 넘버1
  • 높이(mm)2400
  • 너비(mm)1600
관련성
  • 주 재료알루미늄
  • 부 재료라미네이트
  • 설계국가스페인
  • 제조국가스페인
분류
  • BIMobject 카테고리문 - 미닫이 문
  • IFC 분류
  • CSI 마스터 형식 2014 코드08 39 13
  • CSI 마스터 형식 2014 제목Airtight Doors
  • OmniClass 번호23-17 19 11 13
  • OmniClass 제목Sliding Door Gear
Common.Footer.ValueProp.Image.AltText

Revit용 Design App

한 번의 클릭으로 Revit 모델에 바로 패밀리를 로드하세요.

새 객체에 더 쉽게 접근하고, Revit 패밀리를 저장하고, 팀과 협업할 수 있는 공간을 확보하세요.

  • 체크 표시Revit 바로 옆에서 BIM 개체로 직접 작업
  • 체크 표시 2GB 클라우드 스토리지 - Revit 콘텐츠 저장
  • 체크 표시 Revit에서 바로 내재 탄소 LCA(A1-A3) 획득