model FS_4Poles_Single-stage end suction pump

■Usage ①General water supply ②Cold/hot water circulation ③Industrial water ④Irrigation ■Features ①We have developed a series of 4-pole type products in pursuit of small size and light weight. ②Bomb efficiency has been drastically improved by adopting an impeller and casing that utilize our original analysis technology. ③The standard specifications (water volume range, liquid temperature, and maximum operating pressure) are wider than those of conventional models, and high indentation specifications (special specifications) are also available. ④A back-pull-out (B.P.O.) structure that enables disassemble and inspection without removing suction, discharge pipes, heat insulation, and cold insulation. ⑤Since the discharge loss is located above the center of the casing and the casing has legs, the structure is resistant to piping loads. ⑥Sealed type coupling guards and protectors are attached to the exposed parts of the rotating body to enhance safety.

사양

■Standard Specifications
[Number of contacts]
4 poles
[Handling liquid]
Fresh water 0 to 100°C
[Suction total head]
-6m (20 °C) *Selection chart Within discharge volume
※The aperture 200X200 is-5m.
※The aperture 200X150 is-3.5m.
※The bore 250X200 is only for indentation.)
[Max. working pressure]
Port size 100X80 or less: 0.98MPa
Diameter 125X100 or more: 1.37MPa
[Structure]
Impeller: closed
Shaft seal: Mechanical seal
Bearing : Sealed ball bearings
Flange :JIS10K (standard)
[Material]
•Casing: FC200 (bore size 100X80 or less)
: FC250 (bore size 125X100 or larger)
Impeller :FC200 (models not listed below)
: SUS304 (aperture 40X32, 50X40)
: SCS13 (aperture 65X50, 80X65)
: FC150 (aperture 100X80)
:FCD400(125X100FS4L、150X125FS4L、4 N)
(200X150FS4L、4 N、250X200)
Spindle: SUS304 (bore size 80X65 or less)
: SUS403 (aperture 100X80)
: SUS420J2 (bore size 125X100 or larger)
[Motor]
Phase and number of poles: 3-phase and 4-pole
Voltage:200V(37kW or less)
:200/400V:45kW～132kW
(Please contact us for 160W or higher)
Model/Protective type : Totally enclosed fan type/IP44 (indoor)
Efficiency: IE3 (Playmium Efficiency)
[Installation location]
Indoors