제품 게시
Acousti-Board Ultra - Natural Fiber Soundproof Backer and Tackboard

Acousti-Board Ultra - Natural Fiber Soundproof Backer and Tackboard

Acousti-Board Ultra™ Soundproof Backer
A Sustainable, Natural Fiber Drywall Backer Board

Acousti-Board Ultra™ is a cost-effective, sustainable solution for enhancing acoustic performance of wall assemblies. Made from 50% pre-consumer recycled synthetic fiber, this sound-dampening backer adds density and acoustic mass to wall systems—helping reduce airborne sound transmission while staying concealed behind the finished surface.

Tackable, lightweight, and easy to install, Acousti-Board Ultra™ is typically applied directly to studs using finish nails before drywall installation. It’s an ideal choice for projects requiring an unobtrusive sound control layer with sustainability at its core.

Key Benefits:

  • Contributes to greener building practices
  • Enhances STC performance of wall assemblies
  • Economical and efficient
  • Tackable surface for added functionality when used behind stretched fabric as a wall panel or tack board
  • Simple installation with conventional tools

Achieve better acoustics and meet environmental goals—without compromising design intent.

사양
  • SECTION 09 84 33

    Acousti-Board Ultra Soundproofing Backer Wall Panels

    PART 1 GENERAL

    1. SECTION INCLUDES
      1. Acousti-Board Ultra soundproofing backer wall panels.
    2. REFERENCES
      1. American Society for Testing and Materials (ASTM)
        1. ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.
        2. ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials.
        3. ASTM E90: Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements.
        4. ASTM E795: Standard Practices for Mounting Test Specimens During Sound Absorption Tests
      2. International Code Council (ICC)
        1. ICC IBC: International Building Code
    3. SUBMITTALS
      1. Product Data: Manufacturer’s data sheet and installation instructions.
      2. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified acoustical panel.
      3. Test Reports: Upon request, submit certified test reports to verify specified product performance.
    4. MAINTENANCE MATERIAL
    5. Extra Materials:
      1. Deliver no less than two percent (2%) / (Other) of each type, color and pattern of material.
      2. Extra materials shall be from the same production run as the original materials.
      3. Extra materials shall remain in the manufacturer’s original packaging and given to the building owner upon substantial completion of the work. Store extra materials per instructions as described in storage and handling requirements.
    6. QUALITY ASSURANCE
      1. Qualifications:
        1. Manufacturers: Provide acoustical wall panels from a single manufacturer.
        2. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
      2. Performance Requirements:
        1. Surface Burning Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM E84. Acoustical panel surface burning performance should comply with the International Building Code and other local building code requirements.
        2. Acoustical Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM C423 and ASTM E90.
    7. DELIVERY, STORAGE, AND HANDLING
      1. Storage and Handling Requirements:
        1. Handle panels carefully to avoid any damage.
        2. Store panels indoors in a clean, cool, dry place, and out of direct sunlight.
        3. Store panels in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
    8. SITE CONDITIONS
      1. Ambient Conditions:
        1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
        2. Do not install products under environmental conditions outside manufacturer’s recommended limits.
      2. Existing Conditions: Do not install wall panels until space is enclosed and weather proofed, and wet work is completely dry.
    9. WARRANTY
      1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

    PART 2 PRODUCTS

    (Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional Acousti-Board Ultra information can be found on our website

    1. MANUFACTURERS
      1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
        Phone: 952-448-5300. Fax: 952-448-2613. Website:
    2. DESCRIPTION
      1. Product: Acousti-Board Ultra soundproofing backer wall panels by Acoustical Surfaces, Inc.
      2. Products Options:
        1. Panel Composition: 50% pre-consumer recycled synthetic fiber
        2. Panel Density: 13 lb pcf
        3. Panel Thickness: 1/2" ± 1/16”
        4. Panel Size: (2’ x 4’) / (4’ x 8’)
        5. Edge Detail: Square
        6. Mounting Method: (Adhesive) / (Mechanical Fastener)
      3. Product Performance:
        1. Acoustical Performance
          1. Noise Reduction Coefficient (NRC) per ASTM C423 – 0.50
          2. Sound Transmission Class (STC) per ASTM E90 – 15
        2. Surface Burning Performance
          1. Fire Rating per ASTM E84: Class A.

    PART 3 EXECUTION

    1. EXAMINATION
      1. Verification of Conditions:
        1. Examine surfaces scheduled to received furred out or directly attached acoustical units for unevenness, irregularities or dampness that would affect quality and execution of work.
        2. All wet work in the installation area must be complete, cured, and dry prior to installation.
        3. Wall assembly shall be complete, inspected, and accepted before wall work begins.
    2. INSTALLATION
    3. Comply with manufacturer’s instructions and recommendations for installation of wall panels and with industry standards.
    4. CLEANING
    5. Clean surfaces of wall panels per manufacturer’s instructions or recommendations.
    6. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
    7. PROTECTION
    8. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

    END OF SECTION

기술 사양
  • 특징 참조acoustical-surfaces-acousti-board
  • 제품군Soundproofing Backer Board
  • 제품분류Soundproofing Products
  • 유형건축 자재
  • 게시일2011-04-21
  • 에디션 넘버1
  • 높이(인치)96
  • 너비(inches)48
  • 깊이(inches)0.5
관련성
  • 주 재료셀룰로오스
  • 설계국가미국
  • 제조국가미국
  • 순 중량(Lbs)20
분류
  • BIMobject 카테고리건축 자재 - 흡음 판넬 & 액세서리
  • IFC 분류
  • ETIM 코드EG000006
  • ETIM 이름Installation ducts for wall and ceiling
  • Uniclass 2015 코드Ac_40_65_79
  • Uniclass 2015 설명Sound controlling
  • CSI 마스터 형식 2014 코드09 81 13
  • CSI 마스터 형식 2014 제목Acoustic Board Insulation
  • OmniClass 번호23-15 13 19 35
  • OmniClass 제목Acoustical Wall Treatment

지역 가용성

북미
과들루프
과테말라
그레나다
그린란드
네덜란드령 카리브 해 지역
니카라과
도미니카
도미니카 공화국
마르티니크
멕시코
몬세라트
미국
미국령 버진아일랜드
바베이도스
바하마
버뮤다
벨리즈
생마르탱
생바르텔레미
생피에르앤드미클롱
세인트루시아
세인트빈센트그레나딘
세인트키츠네비스
신트마르턴
아루바
아이티
앤티가 바부다
앵귈라
엘살바도르
영국령 버진아일랜드
온두라스
자메이카
캐나다
케이맨 군도
코스타리카
쿠바
퀴라소
터크스케이커스 제도
트리니다드토바고
파나마
푸에르토리코