Shockproof and anti-UV plastic resin structure.
• Nominal diameter: 100 mm.
• Ceramic exchanger with hexagonal cells. High heat exchange efficiency (up to 90% at minimum airflow).
• Wi-Fi module capable of establishing the communication between products through a local “mesh” network, allowing a coordinated functioning and a correct indoor ventilation.
• High efficiency EC motor fan; five operating speeds, to maximize performance when needed, or to minimize noise and consumption.
• Integrated relative humidity probe.
• One-way remote control that allows to set parameters or to view useful product information. In detail:
• to switch on/off the machine,
• to select the operating mode (4 different choices),
• to set fan speed,
• to select the relative humidity threshold value that activates the Boost speed (three pre-defined levels that can be set at 50%, 65% and 80%),
• to activate “Night Mode”,
• to show filter status.
• Five different operating modes:
• Continuous ventilation with heat recovery: the product cyclically extracts and introduces air to and from the room, recovering the energy stored in the exchanger;
• Ventilation with air extraction only: stale air is extracted from the environment;
• Ventilation with air intake only: the product introduces fresh air into the environment;
• Automatic ventilation: the heat recovery unit automatically manages the airflows based on the relative humidity sensor readings;
• “Night” ventilation: when the light in the room goes down, the product automatically forces the fan to run at minimum speed, regardless of the relative humidity values detected.
• Two air filters, a 65% IsoCoarse and a pre-filter for dust, both easily removable for washing.
• Mechanical quick closing system of the air delivery integrated into the product chassis.
• External rubber grille, which can be installed from the outside using plugs or from the inside, through the hole in the wall.
• Insect mesh, which can be installed into the duct from inside.
