TEROSON FO 150 FOIL-TACK M+S

Google翻訳”,

TEROSON FO 150 FOIL-TACK M+S は、ホットメルト技術を備えた、防水、空気密、拡散防止の全面粘着特殊シーリングストリップです。

伝統的にカーテンウォールに使用されており、ファサード要素の防湿性と気密性を確保します。水蒸気の浸透や結露の発生を防ぎます。

ロールの長さ: 20 メートル & 30 メートル

幅：80mm、100mm、150mm、200mm、240mm、300mm、350mm、400mm、500mm、700mm

仕様

Properties:
- For indoor use (warm, room-facing side of the wall)
- Diffusion-, air tight
- Thin, light-weight but highly robust
- Very fast and user-friendly installation
- Can be repositioned
- Powerful adhesion even on wet window frames
- Bitumen-free and bitumen-resistant
- Can be used all year round (down to -5 °C)
- Compliant with DIN 18533 for highest requirement
Approvals:
- DIN 18533 for highest requirements
- EMICODE EC 1 PLUS
Technical descriptions:
- Material base: Double-laminated special sealing strip combined withHenkel hotmelt technology
- Color: Anthracite
- Length (EN 1848-2): 20 / 30 m ± 0,1 %
- Width (EN 1848-2): 150-1000 mm ± 0,05 %
- Thickness (EN 1849-2): total - ca. 0,4 mm ± 10 % effect. 100µm ± 5 %
- Area weight (EN 1849-2): ca. 0,4 kg/m² ± 0,03
- Straightness (EN 1842-2): passed
- Visible defects (EN 1842-2): passed
- Application temperature: -5 °C bis +35 °C
- Cold flexibility:(EN 495-5) > -30 °C
- Tensile strength / Extension N/6mm): (EN 12311-2, method B) ≥ 25 N ≥ 30 %
- Tear propagation resistance: (EN 12310-1) > 100 N (Nail shank)
- Resistance to static load (EN 12730): ≤ 5 kg (test method B)
- Resistance to impact: (EN 12691): ≤ 150 mm (test method A), ≤ 500 mm (test method B)
- Shear resistance of the seams: (EN 12371-2) > 125 N/50 mm
- Durability with artificial aging: (EN 1296 & EN 1928) passed
- Resistance to chemicals: (DIN EN 847 & EN 1928) passed
- Water vapor permeability: (EN 1931 (m²sPa/kg)) 4,0 ± 30% / sd-value = 102 m
- Watertightness (EN 1928): 60 kPA (passed) /4 bar / 72 h ≙ 40 mW
- Bitumen compatibility: (EN 1548 & EN 1928) passed
- Fire resistance:(EN 13501-1) classe E
- UV resistance: 12 months
- Roll dimensions: 30 m long, 80-350 mm wide; 20 m long, 400-700 mm wide
Installation instructions:
TEROSON FO 150 FOIL-TACK M+S is equipped with an asymmetrically divided release film. After peeling off the 30 mm wide film, this part of the sealing strip can be fixed cleanly and efficiently to the profile/frame.
In the 2nd step, evenly pull the release film off the selfadhesive hotmelt coating. Press the strip firmly down to the substrate using the TEROSON hard rubber roller.