Exterior Wash Pro L CTC Outdoor-rated wash light with color temperature control

Physical

• Length: 165 mm (6.49 in.)
• Width: 275 mm (10.83 in.)
• Height: 370 mm (14.57 in.)
• Weight: 12.4 kg (27.3 lbs)

Dynamic Effects

• Intensity: 0 - 100%
• Color temperature control: 2400K - 6500K

Control and Programming

• Control systems: DMX, RDM
• User interface: Magnetic sensor for local diagnostics and focusing
• Stand-alone control: Up to 20 scenes with individual fade/hold times
• Control resolution: 8-bit DMX control of each color
• Dimmer resolution: 16-bit DMX control of intensity
• DMX channels: 3/3 (Standard/Basic)
• DMX compliance: USITT DMX512/1990
• RDM compliance: ANSI/ESTA E1.20
• DMX/RDM transceiver: Galvanic-isolated RS-485
• Firmware update: Serial upload via DMX link

Optics

• Light source: 12 x 2400K, 12 x 4000K, 12 x 6500K white color LEDs
• Minimum LED lifetime: 100,000 hours (to > 70% luminous output)*
• LED manufacturer: Cree
• Binning: Tight color and flux binning
  (Figure obtained under manufacturer's test conditions at Ta = 25°C)

Beam Angle Options

• Native beam angle: 7°
• Narrow micro lens: 9°
• Medium micro lens: 15°
• Wide micro lens: 30°
• Very Wide micro lens: 50°
• Asymmetric micro lens: 8° x 60°

Photometric Data

• CRI (Color Rendering Index): > 70
• CCT: 2400K - 6500K (default 4000K)
• Luminous Output:
  • 2400K: 4900 lm
  • 4000K: 10,500 lm
  • 6500K: 7500 lm
    (Measured in steady state after 30 minutes warm-up at 25°C ambient)

Construction

• Housing: Cast aluminum
• Color: Traffic grey RAL 7042 (other colors available upon request)
• Surface treatment: Anodized and electrostatic powder-coated
• Protection rating: IP66
• Effective Projected Area (EPA): 0.097 m² / 0.120 m²
• Impact resistance: IK08
• Corrosion resistance: C5 High (ISO 12944-6)
• Vibration resistance:
  • 1.0g, Sinusoidal (IEC 60068-2-6)
  • 0.7g RMS Random (IEC 60068-2-64)
  • 3.0g (ANSI C136-31)

Installation

• Mounting: Adjustable bracket
• Orientation: Any
• Minimum distance to illuminated surfaces: 0.1 m (0.3 ft.)

Connections

• Power connection: 2 m (6.5 ft.) cable tail, open-ended
• Power input cable type (EU models): H07RN-F 3G 1.0 mm², 450/750V, VDE
• Power input cable type (US models): PVC SJTW 3 x 1.31 mm² (16AWG) 105°C 300V VW-1
• Data connection: 2 m (6.5 ft.) open-ended 6-conductor combined input + output cable tail
• Hybrid power/data cables: 8-pin custom connectors available on request

Electrical

• AC power: 100 - 240 / 277 V nominal, 50/60 Hz
• Power supply unit: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 13 A
• Surge protection: 4 KV
• Max earth leakage: 0.5 mA
• Power factor:
  • 0.99 @ 110 V / 120 V
  • 0.95 @ 208 V / 230 V
  • 0.92 @ 277 V
• Max current draw:
  • 1.50 A @ 100 V
  • 1.25 A @ 120 V
  • 0.65 A @ 230 V
  • 0.54 A @ 277 V
• Power consumption:
  • Maximum: 150 W (reduced mode 120 W)*
  • Idle: 3.5 W*
    (Allow for a deviation of +/- 10%. Idle = all LEDs at zero intensity)

Thermal

• Cooling: Convection
• Maximum ambient temperature: 45°C (113°F)*
  (Above this temperature, the fixture regulates output to prevent overheating)
• Minimum ambient temperature: -30°C (-22°F)**
  (Power must be maintained below -20°C (-4°F))
• Total heat dissipation (calculated, +/- 10%): 512 BTU/hr

Environmental

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (max output): 71 lm/W
• LWR (Lumen-to-Weight Ratio): 847 lm/kg (385 lm/lb)*
• Packaging: FSC certified cardboard inlay and outer box

Approvals

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 1598
• US EMC: 47 CFR Part 15 Class B
• Canadian safety: CSA C22.2 No. 250.0
• Canadian EMC: ICES 003(B), ICES 005(B)
• Australia/NZ: RCM
• United Kingdom: UKCA
• India: BIS IS 10322 (Part 5/Section 5)

Ordering InformationFixtures

• Exterior Wash Pro L CTC, EU, grey: P/N MAR-90590011
• Exterior Wash Pro L CTC, US, grey: P/N MAR-90590015

Accessories

• Micro Lens Pro L - Narrow: P/N MAR-90590036
• Micro Lens Pro L - Medium: P/N MAR-90590037
• Micro Lens Pro L - Wide: P/N MAR-90590038
• Micro Lens Pro L - Very Wide: P/N MAR-90590039
• Micro Lens Pro L - Asymmetric: P/N MAR-90590040
• Exterior Wash Pro Multitool: P/N MAR-90590025
• Hybrid PD cable tail In/Out 0.5 m, black: P/N MAR-91700020
• Attachment plate for safety wire: P/N MAR-90590050
• Baffle Snoot Pro L CTC: P/N MAR-90590023
• Hybrid PD cable tail In/Out 0.5 m, white: P/N MAR-91700022