Spain_CubPlanaTransInv_Texlosa+FlagonSv180_220,20 mm

Cover consisting of: formation of slopes with cellular concrete with an average thickness of 8 cm finished in cement mortar with an average thickness of 2 cm with the necessary surface resistance to receive the waterproofing; Non-woven geotextile separator layer made of 100% polyester ROOFTEX V 200 fibres, mechanically needle-punched with subsequent heat treatment and calendering with biological resistance to fungi and bacteria with a weight of 200 g/m², floating waterproofing membrane using a synthetic sheet of PVC-P FLAGON SV 180 with a thickness of 1.8 mm, dimensionally stabilised with a 50 g/cm2 fibreglass veil, resistant to UV rays, atmospheric agents and roots, with a tensile strength >/= 9 N/mm2 (UNI EN-12311-2), elongation at break > 200% (UNI EN 12311-2) and a resistance to static puncture > 20 kg (UNI EN 12730) welded by hot air thermofusion at the overlaps and reinforced in corners and nooks with FLAG ANGLES. , Non-woven geotextile separator layer made of 100% polyester ROOFTEX V 200 fibres, mechanically needle-punched with subsequent heat treatment and calendering with biological resistance to fungi and bacteria with a weight of 200 g/m²;TEXLOSA 80/35 R walkable insulating tile made up of a base of extruded polystyrene foam with a closed-cell structure 80 mm thick with thermal conductivity 0.035 W/mºK (UNE EN 13164), self-protected on its upper surface with a 35 mm thick layer of mortar, made up of selected aggregates and special additives, with a rustic rough finish in grey or white.