Pubblica i tuoi prodotti
R 816 CE - Epoxy coal tar coating

R 816 CE - Epoxy coal tar coating

R 816 CE is a two component coating based on unmodified epoxy resin cured with a polyamine curing agent. It has excellent water & alkali resistance where it combines the chemical resistant properties of an epoxy resin with excellent water resistant properties of a coal tar.
Voce di capitolato
  • Type: Two pack, cold cured Colour: Black General composition: Amine cured epoxy, blended with coal tar Mixing ratio (R:H) - 2:1 by volume Finish: Semi glossy Pot life @ 270C (ASTM D 2471): 60-90 Minutes Drying time (ASTM D 1640) To touch 1-2 hrs Walkable 5-6 hrs Hard dry 24 hrs Full cure 7 days Overcoat interval: 6 hrs Performance data Flexibility test (ASTM D 522): Passes Cross cut adhesion test (ASTM D 3359): Passes Salt spray test 500 hrs (ASTM B 117): Passes
Specifiche tecniche
  • Rif. UnicoR-816-CE
  • Famiglia di prodottoConcrete Repair, Anchors & Grouts
  • Gruppo di famigliaCONCRETE REPAIR AND PROTECTION
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2020-01-06
  • Numero di versione1
Relativo a
  • Materiale principaleResina epossidica
  • Progettato inIndia
  • Prodotto inIndia
Classificazioni
  • Categoria BIMobjectPavimentazioni - Rivestimenti
  • Clasificazione IFCFloor
  • Nome UNSPSCFlooring
  • Codice UNSPSC301617
  • Codice CSI MasterFormat 201403 53 00
  • Titolo CSI MasterFormat 2014Concrete Topping
  • Numero OmniClass23-15 17 11 11
  • Titolo OmniClassFloor Toppings
  • Codice CSI UniFormat IIC3020
  • Titolo CSI UniFormat IIFloor Finishes

Disponibilità Regionale

Asia
India
Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

  • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
  • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
  • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit