Pubblica i tuoi prodotti
R 34 CE - Non-toxic epoxy coating for floors & walls

R 34 CE - Non-toxic epoxy coating for floors & walls

R 34 CE is a two component, non-toxic epoxy protective coating for use on cementitious & concrete surfaces. It provides a tough, hard wearing surface resistant to oil, chemical attack and bacterial growth. R 34 CE is solvent free and available in both pigmented & non-pigmented versions
Voce di capitolato
  • R 34 CE @ 27 ± 1ºC Mixed Density 1.68 g/cc Pot life 30 minutes Time between coats 16 - 18 hours Drying Times Walkability 24 hours Full cure 7 days Bond strength > 1.5 N/mm2 Tensile strength > 12 N/mm2 Shore D hardness > 70 Water absorption Nil VOC 333 g/l
Specifiche tecniche
  • Rif. UnicoR-34-CE
  • Famiglia di prodottoFlooring Solutions
  • Gruppo di famigliaEPOXY COATINGS & SELF LEVELLERS
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2020-01-06
  • Numero di versione1
Relativo a
  • Materiale principaleResina epossidica
  • Progettato inIndia
  • Prodotto inIndia
Classificazioni
  • Categoria BIMobjectPavimentazioni - Fondo
  • Clasificazione IFCFloor
  • Nome UNSPSCCarpet or rug underlays
  • Codice UNSPSC30161719
  • Codice Uniclass 2015Pr_35_31_06_80
  • Descrizione Uniclass 2015Smoothing and levelling underlay compounds
  • Codice CSI MasterFormat 201406 16 26
  • Titolo CSI MasterFormat 2014Underlayment
  • Numero OmniClass23-15 17 11 13 11 13
  • Titolo OmniClassPortland Cement Floor Underlayments
  • Codice CSI UniFormat IIB1010
  • Titolo CSI UniFormat IIFloor Construction

Disponibilità Regionale

Asia
India
Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

  • Segno di spuntaLavora direttamente con gli oggetti BIM accanto a Revit
  • Segno di spunta 2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
  • Segno di spunta Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit