Sheffield Metals

SMI 1.5" Mechanical Seam

Sheffield Metals offers a complete line of engineered and non-engineered standing seam profiles for metal roof and wall systems. Whether your project is residential or commercial, solid substrate or open framing, big or small, we have the resources and products you need for your project. All of our panel profiles are tested to meet minimum UL 90 approvals.

Many of our engineered panel profiles are tested to more stringent requirements, including:

Wind uplift testing
Water penetration testing
Water submersion testing
Air infiltration testing
Impact resistance testing

We specialize in providing painted Galvalume^® and aluminum for the architecturally driven metal panel industry, including:

- More than 50 Sherwin Williams^® colors continuously stocked in Galvalume^®

- Several popular colors in aluminum products in both coil and sheet

- Products meeting LEED requirements

- Color matching for virtually any custom color

- Zinc (elZinc^®), stainless steel, and copper products in both coil and sheet

- 40-year Kynar^® and 40-year silicone-modified polyester (SMP) coating warranties
- 5- to 35-year weathertight warranties- SMI warranty documents are available for viewing online

- Premium metal supplier coast to coast via five regional distribution centers

Voce di capitolato

SMI 1.5" Mechanical Seam Standing Seam Panels over Plywood Roof Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over a minimum ½ inch thick plywood roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact the SMI Technical Department to verify the decking assembly.
SMI 1.5" Mechanical Seam Standing Seam Panels over Steel Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify the decking assembly.
SMI 1.5" Mechanical Seam Standing Seam Panels over Insulated Steel Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over rigid board-insulated structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify the roofing assembly.

Specifiche tecniche

Rif. Unicosmi15mechanicalseam
Famiglia di prodottoMetal Roof Panels
Gruppo di famigliaRoof panels concealed fastener
TipoOggetto (oggetto singolo)
Data di pubblicazione2024-10-20
Numero di versione1

Links

Link al Prodottohttps://sheffieldmetals.com/learning-center/profile/smi-1-5-mechanical-seam/
Certificazione di Prodottohttps://sheffieldmetals.com/wp-content/uploads/2023/11/1.5MS_Cutsheet_0623.pdf
Descrizione Tecnicahttps://sheffieldmetals.com/wp-content/uploads/2025/04/1-5ms-cutsheet_0425-v2.pdf

Relativo a

Materiale principaleAcciaio
Materiale secondarioAlluminio
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectEdilizia - Coperture, tetti e tegole
Clasificazione IFCTetto
Codice ETIMEG019610
Nome ETIMRoofing materials
Codice Uniclass 2015EF_30_10
Descrizione Uniclass 2015Roofs
Codice CSI MasterFormat 201407 41 13
Titolo CSI MasterFormat 2014Metal Roof Panels
Numero OmniClass23-13 39 27 11 11
Titolo OmniClassMetal Roof Panels

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago