RAB Lighting Inc.

Lightcloud Sensor LCSENSE/W

LCSENSE/W

Passive infrared motion detector with built-in fixture and zone control

Occupancy and vacancy sensing with adjustable sensitivity and timeouts

Switching for a fixture or entire zone, hard-wired or remote

Supports 0-10V dimming for LED and fluorescent fixtures

Easily set up schedules and scenes

Power measurement and energy reporting

Remote control from Lightcloud web application

Communicates over secure wireless mesh network - no internet required

Closed loop daylight harvesting

Voce di capitolato

Product Details
Application:
Standard (8-12 ft mounting height)
Mounting Type:
Ceiling/Surface Mount
Compliance
IP Rating:
Ingress protection rating of IP65 for dust and water
Electrical :
Dimming Driver:
Driver includes dimming control wiring for 0-10V dimming systems. Requires separate 0-10V DC dimming circuit. Can dim as low as 1%. Actual dimming range is defined by driver.
Installation:
All Lightcloud components should be installed by a licensed electrician in accordance with local codes.
Input Voltage:
120V through 277V
Frequencies:
50/60 Hz
Electrical Ratings:
20 mA @ 120VAC
12 mA @ 277VAC
Load Switching Capacity:
Incandescent: 220VAC, 13A
Standard Ballast: 120/277 VAC, 6A/4A
Electronic Ballast: 277VAC, 12A
Storage Temperature Range:
-40°C to 85°C (-40°F to 185°F)
Sensor Settings
Detection Range:
30 ft diameter at 9 ft mounting height
Construction
Operating Temperature Range:
-20°C - 40°C (-4°F - 104°F)
Maximum Relative Humidity:
95%
Wire Gauge:
4x 16AWG High-voltage pigtails, stripped
2x 22AWG Low-voltage pigtails, stripped
Wireless Range
Line of Sight:
1,000 ft
Obstructions:
100 ft
Other
Warranty:
10-year full hardware warranty with 100% repair/replacement coverage for all properly installed devices. See Lightcloud Warranty Terms. Buy American Act Compliance: RAB values USA manufacturing! Upon request, RAB may be able to manufacture this product to be compliant with the Buy American Act (BAA). Please contact customer service to request a quote for the product to be made BAA compliant.