Bypass Terminal Unit with Sound Attenuator - BP-600

The Metalaire BP-600 Bypass Air Terminals are used to achieve variable air volume delivery of conditioned air to a space or zone where constant volume air handlers exist. Variable air volume control is achieved by directing air flow either to the space or to a bypass port in direct response to a signal from the room thermostat. A locking quadrant on the inlet balancing damper determines the total air flow through the box.

Capacities ranging from 200-4,000 CFM in 6 sizes
Damper assembly includes a galvanized single ½” thick box damper providing superior rigidity and close off for accurate control without the use of internal linkage.
A constant volume of air is delivered by the air terminal, but varying amounts are delivered to the space and the bypass plenum
Pneumatic, Electric, or Analog controls available

Voce di capitolato

- Casing constructed of 22 ga. galvanized steel
- BP-600 available in 6 unit sizes to handle 200-4,000 CFM
- Damper assembly includes a galvanized single ½” thick box damper providing superior rigidity and close off for accurate control without the use of internal linkage.
- Insulation is 1/2" thick, 1.5 lb/ft3 dual density coated fiberglass that complies with NFPA 90A, ASTM C-665, and UL-181 requirements
- Industry leading continuous welded primary inlet duct to minimize leakage with three stiffening beads for added rigidity
- Damper rotates in a self-lubricating, long life, low friction thermoplastic bearing
- Integral locking quadrant
- AHRI Certified, ETL listed, UL 1995, Complies with NFPA 90A and UL 181
- All BP-600 terminal units are AHRI certified and shipped with the AHRI seal
Liners
- ½” 1.5lbs fiberglass
- ½” 1.5lbs foil faced
- ½” Thermopure closed cell foam
Other options available:
- Hanger brackets
- Custom options

Specifiche tecniche

Rif. UnicoBypass-Terminal-Unit-Sound-Attenuator-BP-600
Famiglia di prodottoAir Terminal Units
Gruppo di famigliaSingle Duct Air Terminals
TipoOggetto (oggetto singolo)
Data di pubblicazione2019-04-09
Numero di versione1

Links

Link al Prodottohttps://www.metalaire.com/product/model-bp-600
Istruzioni di installazionehttps://www.metalaire.com/doc/single-duct-air-terminals-installation-15691.pdf
Descrizione Tecnicahttps://www.metalaire.com/doc/model-bp-600-submittals-40.pdf

Relativo a

Materiale principaleAcciaio zincato
Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Ventilazione meccanica
Codice Uniclass 2015Pr_65_65_24_16
Descrizione Uniclass 2015Constant volume boxes
Codice CSI MasterFormat 201423 36 13
Titolo CSI MasterFormat 2014Constant-Air-Volume Units
Numero OmniClass23-33 41 17 11
Titolo OmniClassConstant Volume Air Terminal Units
Codice CSI UniFormat IID30
Titolo CSI UniFormat IIHVAC