Pubblica i tuoi prodotti
EGL ENCLOSED & GASKETED INDUSTRIAL

EGL ENCLOSED & GASKETED INDUSTRIAL

FEATURES

  • NEMA 4X, IP66, IP67, and NSF/ANSI Standard 2­–Splash Zone certified
  • Precisely formed lens provides maximum efficiency/reduced glare
  • Seamless closed-cell gasket, poured and formed in place
  • Hose-down tested at 1500 PSI at 1.4 GPM to withstand water penetration
  • Liquid-tight power entry
  • Standard stainless steel latches protect the fixture from corrosion in harsh environments
  • Tamper-resistant latches available
  • -40ºC minimum operating temperature
  • High-performance up to 158 lm/W
  • DLC Compliant
  • Buy American Act compliant
  • Wireless in-fixture control solutions available
  • Made Right Here® in the USA
Voce di capitolato
  • Enclosure

    Outer housing consists of 5VA (f1) fiberglass, rated for flame and weather resistance.

    Internal Housing

    .050″ aluminum.

    Latching

    Stainless steel latches. Injection-molded polycarbonate latches available (not recommended for use in harsh environments, such as a car wash).

    Reflector

    95% reflective highly specular aluminum.

    Reflective Surfaces

    92% minimum average reflective white polyester powder coat bonded to phosphate-free, multi-stage pretreated metal. All internal parts painted after fabrication to facilitate installation, increase efficiency, and inhibit corrosion.

    Shielding

    Frosted, impact-resistant acrylic.

    Electrical

    High-quality mid-power LED board. L70 >50,000 hours. -20ºC to 40ºC maximum ambient operating temperature. -40ºC minimum operating temperature with LA40 option.

    Power Supply

    Fixture has holes in each end suitable for 1/2″ electrical trade size liquid-tight connectors. Power supply must be with flexible liquid-tight conduit or cord rated for wet location use.

    Mounting

    Surface or suspended using four stainless steel mounting straps and two flexible ceiling mount brackets included.

    Listings

    • • cETLus conforms to UL STD 1598 and UL STD 8750. Certified to CAN/CSA STD C22.2 No. 250.0. Suitable for wet locations when specified with watertight hub, STOW or SOOW cord, or mini-male receptacle option.
    • NSF/ANSI Standard 2–Splash Zone certified, IP65, IP66, and IP67 certified, and rated for NEMA 4X.
    • DesignLights Consortium qualified product. Not all versions of this product may be DLC qualified, see the DLC Qualified Products List at www.designlights.org/QPL.
    • Complies with the Buy American Act and other federal regulations. Request certification at hew.com/baa.

    Warranty

    5-year limited warranty, see details
Specifiche tecniche
  • Rif. Unicoegl-enclosedgasketed-industrial
  • Famiglia di prodottoIndoor Luminaires
  • Gruppo di famigliaVandal Resistant
  • TipoOggetto (oggetto singolo)
  • Data di pubblicazione2025-06-18
  • Numero di versione1
Relativo a
  • Materiale principaleMetallo
  • Materiale secondarioVetro
  • Progettato inStati Uniti
  • Prodotto inStati Uniti
Classificazioni
  • Categoria BIMobjectIlluminazione - Illuminazione - Soffitto
  • Clasificazione IFCApparecchio a luce
  • Codice Uniclass 2015EF_70_80
  • Descrizione Uniclass 2015Lighting
  • Codice CSI MasterFormat 201426 51 13
  • Titolo CSI MasterFormat 2014Interior Lighting Fixtures, Lamps, And Ballasts
  • Numero OmniClass23-35 47 11
  • Titolo OmniClassLighting Fixtures

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago