119 gallon storage tank

Residential / commercial glass-lined 119G storage tank

Voce di capitolato

Construction
The tank shall be manufactured from mild steel with
a baked on Cobalt enriched porcelain glass lining
Tank outer shell shall be steel with a baked on
powder coating for protection
The ECO-119GLBB Tank is only certified for Indoor
installation, it should not be located external to the building

Insulation
2" of High R value foam insulation will be sprayed on to the
bare shell of the tank to reduce heat loss

Connections
Connections to the Hot and Cold building supplies shall be
1 1/2" NPT Female type
Connections to the Hot and Cold piping to the Heat Pump
shall be 3/4" NPT Female type
Cold Water Piping from Storage Tank to Heat Pump
and return of Hot Water piping from Heat Pump to Tank
shall be 1/2" Copper or PEX.
2 of 4" long 3/4" Male x 3/4" Male connections will be boxed
which shall be located at the base of the ECO-119GLBB
2 x Magnesium anode rods shall be installed internally

Controls
The tank shall be supplied with a Temperature sensor
installed in a sensor well to control the GS5-45HPC & -D
Additional GS Heat Pumps connected to a tank shall
require an individual Temperature sensor
Tank Sensor wiring to the GS Heat Pump will be 18-2AWG
Two additional Thermowells are supplied with the Tank at
the Top and Bottom levels of the Tank so that a Controller
to provide Demand Response signals can be used

Pressure and Temperature Relief
Tank shall be supplied with a factory installed
ASME certified Pressure and Temperature Relief valve
Settings shall be at 150 Psig for Presssure and
210°F for Temperature

Specifiche tecniche

Rif. Unico119-gallon-storage-tank
Famiglia di prodottoResidential Tanks
Gruppo di famigliaECO-119GLBB
TipoOggetto (oggetto singolo)
Data di pubblicazione2025-09-05
Numero di versione1
Altezza (pollici)63.57
Larghezza (pollici)28
Profondità (pollici)28

Links

Link al Prodottohttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Istruzioni di installazionehttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Certificazione di Prodottohttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Descrizione Tecnicahttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf

Relativo a

Materiale principaleAcciaio al carbonio
Materiale secondarioGranuli di vetro
Progettato inStati Uniti
Prodotto inStati Uniti
Peso Netto (Libbre)345

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - Scaldabagno
Clasificazione IFCRiscaldatore elettrico
Codice ETIMEG000043
Nome ETIMResidential heating
Codice Uniclass 2015Pr_60_60_96
Descrizione Uniclass 2015Water heaters
Codice CSI MasterFormat 201422 33 36.16
Titolo CSI MasterFormat 2014Commercial Storage Electric Domestic Water Heaters
Numero OmniClass23-31 29 00
Titolo OmniClassHot Water Heaters

Disponibilità Regionale

Nord America
Anguilla
Antigua e Barbuda
Aruba
Bahamas
Barbados
Belize
Bermuda
Canada
Costa Rica
Cuba
Curaçao
Dominica
El Salvador
Giamaica
Grenada
Groenlandia
Guadalupa
Guatemala
Haiti
Honduras
Isole BES
Isole Cayman
Isole Turks e Caicos
Isole Vergini Americane
Isole Vergini britanniche
Martinica
Messico
Montserrat
Nicaragua
Panamá
Porto Rico
Repubblica Dominicana
Saint Kitts e Nevis
Saint Martin
Saint Vincent e Grenadine
Saint-Barthélemy
Saint-Pierre e Miquelon
Santa Lucia
Sint Maarten
Stati Uniti
Trinidad e Tobago