DriSteem

Adiatec® Wetted Media System

DriSteem's Adiatec wetted media systems provide evaporative cooling and humidification for a wide variety of applications while taking advantage of the free cooling and energy savings inherent with this technology. These systems work by using the heat already in the air to evaporate water as it passes through saturated media, saving on energy costs compared to alternative evaporative cooling equipment or steam humidification.

In addition, the Adiatec wetted media system can effectively manage shoulder season cooling load, as well as assist on peak cooling days to avoid the purchase of additional cooling equipment. In retrofit situations where the cooling load has increased, installation of an Adiatec wetted media system is significantly less costly than adding a chiller.

Voce di capitolato

- Patented Multi-stage System Controlled by Vapor-logic® Controller: Continuous operation is provided by the multi-stage system, because when one stage is in dry-out mode the other stages remain active.
- Low Energy Usage: Each stage has its own pump, and each of those pumps run only when that stage requires water (up to three stages per system).
- Reduces cooling load: Every pound of water evaporated into the air removes about 1000 Btu of heat from the air (every kg evaporated removes approximately 2250 kJ of heat). This evaporative cooling effect reduces the building's cooling load, resulting in significant energy savings in applications requiring both cooling and humidification.
- Two Media Sizes: In addition to 12” (305mm) media, DriSteem offers 8” (203mm) media for situations where there is lower demand.
- Built-in Droplet Separator: Order the system with a built-in droplet separator to remove water droplets that can form when operating at higher face velocities. The ability to operate at higher velocities delivers more conditioned air to a controlled space.
- User-controlled Version: The user-controlled Adiatec wetted media system does not include the DriSteem Vapor-logic® controller, which saves on cost while maintaining the flexibility to work with an existing Building Automation System.

Specifiche tecniche

Rif. Unicowetted-media
Famiglia di prodottoEvaporative Cooling and Humidification
Gruppo di famigliaWetted Media System
TipoOggetto (oggetto singolo)
Data di pubblicazione2021-12-21
Numero di versione1

Links

Link al Prodottohttps://www.dristeem.com/products/evaporative-cooling-humidification/wetted-media
Istruzioni di installazionehttps://www.dristeem.com/support-and-literature/by-product/wetted-media-system
Certificazione di Prodottohttps://www.dristeem.com/support-and-literature/by-product/wetted-media-system
Descrizione Tecnicahttps://www.dristeem.com/support-and-literature/by-product/wetted-media-system

Relativo a

Progettato inStati Uniti
Prodotto inStati Uniti

Classificazioni

Categoria BIMobjectRiscaldamento, ventilazione e condizionamento - HVAC - Altro

Disponibilità Regionale

Europa	Asia	Nord America	Africa	Sud America	Oceania
Albania	Afghanistan	Anguilla	Algeria	Argentina	Australia
Andorra	Arabia Saudita	Antigua e Barbuda	Angola	Bolivia	Figi
Austria	Armenia	Aruba	Benin	Brasile	Guam
Belgio	Azerbaijan	Bahamas	Botswana	Cile	Isola Norfolk
Bielorussia	Bahrein	Barbados	Burkina Faso	Colombia	Isole Cook
Bosnia ed Erzegovina	Bangladesh	Belize	Burundi	Ecuador	Isole Marianne Settentrionali
Bulgaria	Bhutan	Bermuda	Camerun	Guiana Francese	Isole Marshall
Cipro	Brunei	Canada	Capo Verde	Guyana	Isole Minori Esterne degli Stati Uniti
Città del Vaticano	Cambogia	Costa Rica	Ciad	Isole Falkland (Malvine)	Isole Pitcairn
Croazia	Cina	Cuba	Comore	Paraguay	Isole Salomone
Danimarca	Corea del Nord	Curaçao	Congo	Perù	Kiribati
Estonia	Corea del Sud	Dominica	Costa d'Avorio	Suriname	Nauru
Finlandia	Emirati Arabi Uniti	El Salvador	Egitto	Uruguay	Niue
Francia	Filippine	Giamaica	Eritrea	Venezuela	Nuova Caledonia
Germania	Georgia	Grenada	eSwatini		Nuova Zelanda
Gibilterra	Giappone	Groenlandia	Etiopia		Palau
Grecia	Giordania	Guadalupa	Gabon		Papua Nuova Guinea
Guernsey	Hong Kong	Guatemala	Gambia		Polinesia Francese
Irlanda	India	Haiti	Ghana		Samoa
Islanda	Indonesia	Honduras	Gibuti		Samoa Americane
Isola di Man	Iran	Isole BES	Guinea		Stati Federati di Micronesia
Isole Åland	Iraq	Isole Cayman	Guinea Equatoriale		Timor Est
Isole Faroe	Isola di Natale	Isole Turks e Caicos	Guinea-Bissau		Tokelau
Italia	Isole Cocos (Keeling)	Isole Vergini Americane	Kenya		Tonga
Jersey	Israele	Isole Vergini britanniche	Lesotho		Tuvalu
Lettonia	Kazakistan	Martinica	Liberia		Vanuatu
Liechtenstein	Kirghizistan	Messico	Libia		Wallis e Futuna
Lituania	Kuwait	Montserrat	Madagascar
Lussemburgo	Laos	Nicaragua	Malawi
Macedonia del Nord	Libano	Panamá	Mali
Malta	Macau	Porto Rico	Marocco
Moldavia	Maldive	Repubblica Dominicana	Mauritania
Monaco	Malesia	Saint Kitts e Nevis	Mauritius
Montenegro	Mongolia	Saint Martin	Mayotte
Norvegia	Myanmar (Burma)	Saint Vincent e Grenadine	Mozambico
Paesi Bassi	Nepal	Saint-Barthélemy	Namibia
Polonia	Oman	Saint-Pierre e Miquelon	Niger
Portogallo	Pakistan	Santa Lucia	Nigeria
Regno Unito	Palestina	Sint Maarten	Repubblica Centrafricana
Repubblica Ceca	Qatar	Stati Uniti	Repubblica Democratica del Congo
Romania	Singapore	Trinidad e Tobago	Riunione
Russia	Siria		Ruanda
San Marino	Sri Lanka		Sahara Occidentale
Serbia	Tagikistan		Sant'Elena
Slovacchia	Tailandia		São Tomé e Príncipe
Slovenia	Taiwan		Senegal
Spagna	Territori Britannici dell'Oceano Indiano		Seychelles
Svalbard e Jan Mayen	Turchia		Sierra Leone
Svezia	Turkmenistan		Somalia
Svizzera	Uzbekistan		Sudafrica
Ucraina	Vietnam		Sudan
Ungheria	Yemen		Sudan del Sud
			Tanzania
			Togo
			Tunisia
			Uganda
			Zambia
			Zimbabwe