Model 1200 RemoteTEST® TESTanDRAIN® Valve

The Model 1200 RemoteTEST® TESTanDRAIN® is designed to provide a more efficient method for performing the NFPA required fire sprinkler system inspector's test on the multiple systems in larger multi-story buildings or in buidling complexes where testing typically consumes time and manpower.

By incorporating a solenoid into the TESTanDRAIN® valve, AGF has created a self-contained method to “remotely” fulfill the primary function of the inspector’s test. It is the only product that enables an individual to perform the inspector’s test function (as stipulated in both NFPA 13 and NFPA 25) on multiple systems from a central and remote position.

With the Model 1200 RemoteTEST® the inspector’s test can be performed on multiple systems by a single operator from a single location through a local switch, an auxiliary panel, an FAC panel, or a LAN system; ultimately saving time and money without sacrificing regular inspections. To learn more, read our brochure.

The Model 1200 is available with all specifiable orifice sizes in 1", 1-1/4", 1-1/2" (special order only) and 2". The Model 1200 is also available with an optional bypass drain loop.

• How RemoteTEST® Works: Energizing the solenoid allows system water to flow through a test orifice. After the preset time delay, the water flow alarm is activated, confirming system integrity. No response from the system alarms indicates potential system problems, such as no water flowing in the system, an inoperable water flow alarm, or other system problems which may require site investigation.
• Designed to be integrated into an existing panel or wired to an independent panel allowing ONE person to activate each specific system or group of systems from one central location.
• Allows quarterly or more frequent system tests to be performed easily during off-peak hours, requiring considerably less time.
• Ability to manually test each floor individually is unaffected.
• The RemoteTEST® is available in 24V DC or 120V AC.
• Available for 1", 1¼", 1½" (special order only), and 2" with multiple TESTanDRAIN® orifice sizes available.
• Considered an auxiliary testing device by NFPA, therefore RemoteTEST®’s “wiring does not require a supervised circuit”.
• RemoteTEST® complies with the NFPA 13, 2007 Edition, Chapters 8.16.2.4.1 – 8.16.2.4.4, A.8.17.4.2, 8.17.4.2.2, 8.17.4.2.4, 8.17.4.3.1, and 8.17.4.3.2
• Repair kits including (1) adapter gasket, (1) ball, (2) valve seats, (1) stem packing, and (1) stem washer are available for all TESTanDRAIN® valves. Valve and orifice size must be specified when ordering.
• Made in the USA