Pubblica i tuoi prodotti

Maxam | 1 Hour Fire-Rated Floor Door | FHD1

Maxam | 1 Hour Fire-Rated Floor Door | FHD1

Activar Construction Products Group

Maxam | 1 Hour Fire-Rated Floor Door | FHD1

A floor door with multiple installation options including cast-in-place or wood framing. You can rely on our NFPA 288-tested floor door to control the transmission of heat and flames in floor/ceiling assemblies with models for one, two or three hours. The FHD Series includes four door material options and multiple latch and lock combinations.

Voce di capitolato

Product Specifications
Frame Material: 12 gauge (2.75 mm) galvanneal steel with ash fray primer
Door Material: 1/4″ (6.35 mm) Aluminum tread plate with mill finish and 14 gauge (1.99mm) galvanneal steel frame and liner with ash gray primer
Insulation: High-temperature ceramic fiber insulation
Hinge: Continuous stainless steel hinge
Latch: Stainless steel slam latch operated by a stainless steel recessed turn handle topside.
Spring/Cylinder: 316 stainless steel gas spring cylinders
Self Closing Mechanism: 165 degrees Fahrenheit (74 degrees Celsius) fusible link melts during fire automatically closing door without warning by releasing gas in cylinders. Not available on sizes larger than 42″ (1067 mm) x 60″ (1524 mm).
Installation Kit: Includes anchor straps for installing into concrete and screws for wood frame installations
Live Load: 150 lbs/sq ft (700 kg/sq metre)
CERTIFICATIONS:
QAI Laboratories listed and labeled to NFPA-288 for 1, 2 and 3 hours for horizontal fire door assemblies
Testing Standards:
- NFPA 288

Specifiche tecniche

Rif. UnicoMaxam-FD-Fire-Rated-FHD1
Famiglia di prodottoAccess Panels
Gruppo di famigliaFire-Rated Floor Door
TipoOggetto (oggetto singolo)
Data di pubblicazione2024-07-25
Numero di versione1

Links

Link al Prodottohttps://maxammetal.com/product/one-to-three-hour-fire-rated-series/
Istruzioni di installazionehttps://maxammetal.com/wp-content/uploads/2024/04/Floor-Door-FHD-Installation-Maintenance-14I-250.pdf
Descrizione Tecnicahttps://maxammetal.com/wp-content/uploads/2024/03/Floor-Door-FHD-1-Submittal.pdf

Relativo a

Materiale principaleAcciaio zincato
Materiale secondarioAcciaio
Progettato inCanada
Prodotto inCanada

Classificazioni

Categoria BIMobjectEdilizia - Botole
Codice Uniclass 2015TE_10_40_10
Descrizione Uniclass 2015Access doors and traps
Codice CSI MasterFormat 201408 31 13
Titolo CSI MasterFormat 2014Access Doors and Frames
Numero OmniClass23-17 11 27
Titolo OmniClassAccess Doors

Disponibilità Regionale

Nord America
Canada

Prodotti simili

Immagine per JL Industries | Access Panel Multi-Purpose | TM Series

Activar Construction Products Group JL Industries | Access Panel Multi-Purpose | TM Series

Immagine per JL Industries | Access Panel Concealed Frame Flush for Plaster | TMP Series

Activar Construction Products Group JL Industries | Access Panel Concealed Frame Flush for Plaster | TMP Series

4.8 (6)

Immagine per JL Industries | Access Panel Fire-Rated Flush Ceiling | FD Series

Activar Construction Products Group JL Industries | Access Panel Fire-Rated Flush Ceiling | FD Series

Immagine per JL Industries | Access Panel Gasketed | AT Series

Activar Construction Products Group JL Industries | Access Panel Gasketed | AT Series

Immagine per JL Industries | Access Panel Fire-Rated Flush Wall | FD Series

Activar Construction Products Group JL Industries | Access Panel Fire-Rated Flush Wall | FD Series

Immagine per JL Industries | Access Panel Exterior Weather-Resistant Stainless Steel | XPS Series

Activar Construction Products Group JL Industries | Access Panel Exterior Weather-Resistant Stainless Steel | XPS Series

Common.Footer.ValueProp.Image.AltText

App di progettazione per Revit

Carica le famiglie direttamente nel tuo modello Revit con un solo clic

Ottieni un posto per accedere più facilmente a nuovi oggetti, archivia le tue famiglie Revit e collabora con il tuo team.

Lavora direttamente con gli oggetti BIM accanto a Revit
2 GB di spazio di archiviazione cloud: archivia i tuoi contenuti Revit
Ottieni l'LCA (A1-A3) del carbonio incorporato direttamente da Revit