SMI 2" Mechanical Seam

Sheffield Metals offers a complete line of engineered and non-engineered standing seam profiles for metal roof and wall systems. Whether your project is residential or commercial, solid substrate or open framing, big or small, we have the resources and products you need for your project. All of our panel profiles are tested to meet minimum UL 90 approvals.

Many of our engineered panel profiles are tested to more stringent requirements, including:

Wind uplift testing
Water penetration testing
Water submersion testing
Air infiltration testing
Impact resistance testing

We specialize in providing painted Galvalume^® and aluminum for the architecturally driven metal panel industry, including:

- More than 50 Sherwin Williams^® colors continuously stocked in Galvalume^®

- Several popular colors in aluminum products in both coil and sheet

- Products meeting LEED requirements

- Color matching for virtually any custom color

- Zinc (elZinc^®), stainless steel, and copper products in both coil and sheet

- 40-year Kynar^® and 40-year silicone-modified polyester (SMP) coating warranties
- 5- to 35-year weathertight warranties- SMI warranty documents are available for viewing online

- Premium metal supplier coast to coast via five regional distribution centers

Specifikáció

SMI 2.0" Mechanical Seam Standing Seam Panels over Structural Steel Open Framing
Sheffield Metals International (SMI) 2.0" Mechanical Seam Standing Seam Panels with 2-inch high mechanically seamed ribs for installation over open framing with a minimum slope of ½ inch in 12 inches (0.5/12). SMI 2.0” Mechanical Seam Standing Seam Panels in Galvalume are available with Texas Department of Insurance certificates.
Standing Seam Panels over Insulated Steel Deck
Sheffield Metals International (SMI) 2.0" Mechanical Seam Standing Seam Panels with 2-inch high mechanically seamed ribs for installation over insulated structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of ½ inch in 12 inches (0.5/12) for Galvalume roof systems, minimum slope of 2 inch in 12 inches (2/12) for aluminum roof systems. SMI 2.0” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify decking assembly.
SMI 2.0" Mechanical Seam Standing Seam Panels over Steel Roof Deck
Sheffield Metals International (SMI) 2.0" Mechanical Seam Standing Seam Panels with 2-inch high mechanically seamed ribs for installation over structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of ½ inch in 12 inches (0.5/12) for Galvalume roof systems, minimum slope of 2 inch in 12 inches (2/12) for Aluminum roof systems. SMI 2.0” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify the decking assembly.
SMI 2.0" Mechanical Seam Standing Seam Panels over Plywood Deck
Sheffield Metals International (SMI) 2.0" Mechanical Seam Standing Seam Panels with 2-inch high mechanically seamed ribs for installation over plywood roof deck with a minimum slope of ½ inch in 12 inches (0.5/12) for Galvalume roof systems; minimum slope of 2 inch in 12 inches (2/12) for Aluminum roof systems. SMI 2.0” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates.

Műszaki specifikáció

Egyedi azonosítósmi2mechanicalseam
TermékcsaládMetal Roof Panels
TermékcsoportRoof panels concealed fastener
TípusObjektum (egy termék)
Megjelenés dátuma2024-10-20
Verziószám1

Linkek

Termékadatlaphttps://sheffieldmetals.com/learning-center/profile/smi-2-0-mechanical-seam/
Terméktanúsítványhttps://sheffieldmetals.com/wp-content/uploads/2023/11/2.0MS_Cutsheet_0623.pdf
Műszaki leíráshttps://sheffieldmetals.com/wp-content/uploads/2025/04/2-0ms-cutsheet_0425-v2.pdf

Kapcsolódó adatok

Elsődleges anyagAcél
Másodlagos anyagAlumínium
Tervezés helyeEgyesült Államok
Gyártás helyeEgyesült Államok

Besorolások

BIMobject kategóriaÉpítkezés - Tető
IFC besorolásTető
ETIM-kódEG019610
ETIM-névRoofing materials
Uniclass 2015 kódEF_30_10
Uniclass 2015 leírásRoofs
CSI MasterFormat 2014 kód07 41 13
CSI MasterFormat 2014 névMetal Roof Panels
OmniClass szám23-13 39 27 11 11
OmniClass névMetal Roof Panels

Termék elérhetősége

Észak-Amerika
Anguilla
Antigua és Barbuda
Aruba
Bahama-szigetek
Barbados
Belize
Bermuda
Brit Virgin-szigetek
Caribbean Netherlands
Costa Rica
Curaçao
Dominikai Közösség
Dominikai Köztársaság
Egyesült Államok
El Salvador
Grenada
Grönland
Guadeloupe
Guatemala
Haiti
Honduras
Jamaica
Kajmán-szigetek
Kanada
Kuba
Martinique
Mexikó
Montserrat
Nicaragua
Panamaváros
Puerto Rico
Saint Kitts és Nevis
Saint Lucia
Saint Pierre és Miquelon
Saint Vincent és a Grenadine-szigetek
Saint-Barthélemy
Saint-Martin
Sint Maarten
Trinidad és Tobago
Turks- és Caicos-szigetek
Virgin-szigetek