Termékek közzététele
RO-E - Reverse Osmosis
RO-E - Reverse Osmosis
    Condair

    RO-E - Reverse Osmosis

    Reverse osmosis (RO) is an effective and economic way of removing minerals from water. The Condair RO-E has been developed specifically to provide operational, energy and maintenance benefits to Condair humidifiers.

    By removing the minerals from a humidifier’s supply water, the limescale that builds-up in the system is virtually eliminated. This results in a much lower level of required maintenance in all types of humidifier and reduced energy consumption in steam humidifiers.

    Steam humidifiers that run on mains water need to drain their boiling chambers occasionally to maintain a low mineral content and reduce limescale build-up. By using RO supply water, the steam humidifier’s boiling chamber does not require this regular drain. Therefore it uses less energy to maintain the water’s temperature.

    As the water temperature is consistent, the steam output is also consistent, thus improving humidity control. By using resistive steam humidifiers fed by RO water, ±1%RH control can be achieved.

    Other benefits of using RO water with humidifiers include increasing the life of the evaporative pads in evaporative humidifiers and preventing dust carry-over in spray humidifiers.

    Specifikáció
    • Condair RO-E 

      • Voltage: 230V 
      • Frequency: 50 Hz


      Options:

      • All models show the optional housing cover


      Version:

      • Version + is for use with adiabatic humidifiers
      • Models with safety valve are mandatory for CE markets. Note: RO-E 200 and 300 require the safety valve by the external pressure tank. Please consider the instruction in the installation manual! 


      RO-E 40

      Pure water output at 5 °C water temperature against 1 bar: 58 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 98 l/hr


      RO-E+ 40 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 36 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 59 l/hr


      RO-E 100

      Pure water output at 5 °C water temperature against 1 bar: 105 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 181 l/hr


      RO-E+ 100 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 67 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 114 l/hr


      RO-E 200

      Pure water output at 5 °C water temperature against 1 bar: 200 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 352 l/hr


      RO-E+ 200 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 124 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 218 l/hr


      RO-E 300

      Pure water output at 5 °C water temperature against 1 bar: 285 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 513 l/hr


      RO-E+ 300 (for adiabatic humidifiers)

      Pure water output at 5 °C water temperature against 1 bar: 171 l/hr

      Pure water output at 15 °C water temperature against 1 bar: 312 l/hr

    Műszaki specifikáció
    • Egyedi azonosítócondair-ro-e
    • TermékcsaládWater Treatment
    • TermékcsoportReverse Osmosis
    • TípusObjektum (egy termék)
    • Megjelenés dátuma2025-10-02
    • Verziószám1
    • Magasság (mm)792
    • Szélesség (mm)587
    • Mélység (mm)484
    Kapcsolódó adatok
    • Elsődleges anyagPorral bevont acél
    • Tervezés helyeSvájc
    • Gyártás helyeNémetország
    Besorolások
    • BIMobject kategóriaHVAC - HVAC
    • IFC besorolásSzűrő
    • Uniclass 2015 kódPr_60_55_97_72
    • Uniclass 2015 leírásReverse osmosis units
    • OmniClass szám23-39 41 13 15
    • OmniClass névReverse Osmosis and Nanofiltration Membrane Equipment

    Termék elérhetősége

    Dél-Amerika Európa Óceánia Ázsia Afrika
    Argentína
    Ausztria
    Ausztrália
    India
    Dél-afrikai Köztársaság
    Chile
    Belgium
    Új-Zéland
    Indonézia
    Uruguay
    Bulgária
    Izrael
    Csehország
    Kína
    Dánia
    Pakisztán
    Egyesült Királyság
    Szingapúr
    Észtország
    Thaiföld
    Finnország
    Törökország
    Franciaország
    Görögország
    Hollandia
    Horvátország
    Írország
    Izland
    Lengyelország
    Lettország
    Litvánia
    Magyarország
    Németország
    Norvégia
    Olaszország
    Portugália
    Románia
    Spanyolország
    Svájc
    Svédország
    Szerbia
    Szlovákia
    Szlovénia
    Ukrajna
    Common.Footer.ValueProp.Image.AltText

    Design App a Revithez

    Töltse be a családokat közvetlenül a Revit modelljébe egyetlen kattintással

    Szerezzen egy helyet, ahol könnyebben hozzáférhet az új objektumokhoz, tárolhatja a Revit családokat és együttműködhet csapatával.

    • PipaDolgozzon közvetlenül a BIM objektumokkal a Revit mellett
    • Pipa 2 GB felhőtárhely – tárolja Revit tartalmát
    • Pipa Szerezzen be megtestesült szén-dioxid LCA-t (A1-A3) közvetlenül a Revitből