CURVE diffusors™ - Phase-Coherent diffusion, built in bass trap, mid-high internal absorber

SECTION 09 84 00

Curve Diffusors

PART 1 GENERAL

1. SECTION INCLUDES
   1. Curve diffusors and accessories for installation.
2. SUBMITTALS
   1. Product Data: Manufacturer’s data sheet and installation instructions.
   2. Test Reports: Upon request, submit certified test reports to verify specified product performance.
3. QUALITY ASSURANCE
   1. Qualifications:
      1. Manufacturers: Provide acoustical units from a single manufacturer.
      2. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
4. DELIVERY, STORAGE, AND HANDLING
   1. Storage and Handling Requirements:
      1. Handle units carefully to avoid any damage.
      2. Store units indoors in a clean, cool, dry place, and out of direct sunlight.
      3. Store units in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
5. SITE CONDITIONS
   1. Ambient Conditions:
      1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
      2. Do not install products under environmental conditions outside manufacturer’s recommended limits.
   2. Existing Conditions: Do not install acoustical units until space is enclosed and weather proofed, and wet work is completely dry.
6. WARRANTY
   1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

PART 2 PRODUCTS

(Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional Curve Diffusor information can be found on our website: www.acousticalsurfaces.com

1. MANUFACTURERS
   1. Acoustical Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
      Phone: 952-448-5300. Fax: 952-448-2613. Website: www.acousticalsurfaces.com
2. DESCRIPTION
   1. Product: Curve Diffusors by Acoustical Surfaces, Inc.
   2. Product Options:
      1. Composition: Custom faced cylindrical phase-coherent diffusor with built-in
         mass loaded vinyl bass trap membrane and mid-high internal
         absorber
      2. Depth: (Small – 5”) / (Medium – 7”) / Deluxe (5”)
      3. Size: (Small – 14” x 42”) / (Medium – 21” x 42”) / (Custom heights
         available for small and medium only) / (Deluxe – 14” x 46”)
      4. Finish: Standard and custom finish options available – inquire for details
      5. Mounting Method: (Wall Mount – Z-Clips & Z-Bar) /
         (Floor Mount – Z-Clips & Floor Stand)
3. ACCESSORIES
4. Attachment hardware as specified by manufacturer for installation.

PART 3 EXECUTION

1. EXAMINATION
   1. Verification of Conditions:
      1. Examine surfaces scheduled to received furred out or directly attached diffusor units for unevenness, irregularities or dampness that would affect quality and execution of work.
      2. All wet work in the installation area must be complete, cured, and dry prior to installation.
      3. Wall assembly shall be complete, inspected, and accepted before wall work begins.
2. INSTALLATION
3. Comply with manufacturer’s instructions and recommendations for installation of wall panels and with industry standards.
4. CLEANING
5. Clean surfaces of wall panels per manufacturer’s instructions or recommendations.
6. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
7. PROTECTION
8. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

END OF SECTION

Keywords:
sound diffusers
acoustic diffusion panels
recording studio diffusers
acoustical diffusers
diffuser panels
phase-coherent diffusers
professional diffusers
custom diffuser panels
recording studio acoustics
acoustic diffusers
Curve diffusor panels
Curve System acoustic diffusers
sound diffusion panels
studio acoustic diffusers
recording studio diffusors
home theater diffusers
surround-sound diffusion panels
broadband acoustic diffusors
phase-coherent acoustic diffusers
accurate broadband diffusion
mid-high frequency diffusion (300 Hz–7 kHz+)
built-in low-bass absorption
combined diffusion + bass absorption panels
improved stereo imaging & soundfield accuracy
resonance and echo reduction diffusors
flutter-echo control panels
natural-sounding acoustics panels
professional studio acoustic treatment
home studio diffusors
mixing room diffusion panels
mastering room acoustics treatment
podcast room acoustic diffusion
high-end listening room diffusors
audiophile room diffusion panels
broadcast / video studio acoustic diffusors
customizable acoustic diffusors
fabric-faced diffuser panels
veneer-finish acoustic diffusors
decorative acoustic diffusors
aesthetic acoustic treatment panels
wall & ceiling mountable diffusors (vertical/horizontal)
stackable diffuser panels (for under-8-ft ceilings
acoustic diffusors for home theaters
diffusion panels for recording studios
diffusors for control rooms & mixing suites
acoustic treatment for broadcast booths
diffusion panels for post-production suites
acoustic diffusors for rehearsal / performance spaces
acoustic treatment for restaurants, bars, clubs (background sound quality)
acoustic panels for offices, conference rooms, board rooms
diffusors for churches, lecture halls, auditoriums
curve acoustic diffuser for recording studios
phase-coherent diffuser panels for home theaters
recycled-cotton core diffusor for audiophile listening rooms
combination diffusion and bass-trap panels for control rooms
affordable acoustic diffusers for small studios
studio sound diffusion panels with built-in bass absorption
diffuser panels for echo reduction in home studios
decorative acoustic diffusors for Hi-Fi listening rooms
broadband diffusion and low-frequency control panels
acoustic diffusers for balanced room acoustics