Wilkins 70XL Water Pressure Reducing Valve, 3/4" & 1", Lead Free*

Ideal for use where Lead-Free* valves are required. Designed for installation on potable water lines to reduce high inlet pressure to a lower outlet pressure. The unitized replaceable cartridge reduces time involved with cleaning and maintenance. The direct acting integral bypass design prevents buildup of excessive system pressure caused by thermal expansion. The balanced piston design enables the regulator to react in a smooth and responsive manner to changes in system flow demand, while at the same time, providing protection from inlet pressure changes. Meets the requirements of NSF/ANSI 61 & 372* *Product contains weighted average lead content less than 0.25% for wetted surfaces.

Tekniset tiedot

The Pressure Reducing Valve shall be certified to NSF/ANSI 372, of the direct-acting type, and ASSE® 1003 Listed. The integral bypass check valve main body and bell housing shall be cast bronze (ASTM B 584). The pressure reducing valve shall be of the balanced piston design and shall reduce pressure in both flow and no-flow conditions using an adjusting bolt. All internal parts shall be corrosion resistant and included in a replaceable cartridge. The bronze bell housing shall be threaded to the body and shall not require the use of ferrous screws. The Pressure Reducing Valve shall be a ZURN WILKINS Model 70XL.

Tekniset tiedot

Yksilöity viitezurn-70xl
TuoteperhePlumbing
TuoteryhmäValves
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2025-09-02
Painoksen numero1

Linkit

Tuotteen urlhttps://www.zurn.com/products/water-control/pressure-reducing-valves/70xl
Asennusohjeethttps://www.zurn.com/Media-Library/web_documents/pdfs/installation/IS70XL-pdf.pdf
Esittelyvideohttp://www.zurn.com/products/water-control/pressure-reducing-valves/70xl/34-70xl#Videos
Tuotesertifiointihttp://www.zurn.com/products/water-control/pressure-reducing-valves/70xl/34-70xl#Features
Tekninen kuvaushttps://files.zurn.com/spec-sheets/reg-70xl.pdf

Liittyviä

Ensisijainen materiaaliBronze
Toissijainen materiaaliRuostumaton teräs
Suunniteltu:Yhdysvallat

Luokitus

BIMobject-luokkaPutkityöt - Venttiilit
IFC-luokitusVenttiili
Uniclass 2015 -koodiPr_65_54_94_72
Uniclass 2015 -kuvausReduced pressure zone valves
CSI MasterFormat 2014 -koodi40 05 67
CSI MasterFormat 2014 -nimikeSpecialized Pressure and Flow-Control Valves
OmniClass-numero23-27 31 47
OmniClass-nimikePressure Regulating Valves

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret