Sheffield Metals

SMI 1.5" Mechanical Seam

Sheffield Metals offers a complete line of engineered and non-engineered standing seam profiles for metal roof and wall systems. Whether your project is residential or commercial, solid substrate or open framing, big or small, we have the resources and products you need for your project. All of our panel profiles are tested to meet minimum UL 90 approvals.

Many of our engineered panel profiles are tested to more stringent requirements, including:

Wind uplift testing
Water penetration testing
Water submersion testing
Air infiltration testing
Impact resistance testing

We specialize in providing painted Galvalume^® and aluminum for the architecturally driven metal panel industry, including:

- More than 50 Sherwin Williams^® colors continuously stocked in Galvalume^®

- Several popular colors in aluminum products in both coil and sheet

- Products meeting LEED requirements

- Color matching for virtually any custom color

- Zinc (elZinc^®), stainless steel, and copper products in both coil and sheet

- 40-year Kynar^® and 40-year silicone-modified polyester (SMP) coating warranties
- 5- to 35-year weathertight warranties- SMI warranty documents are available for viewing online

- Premium metal supplier coast to coast via five regional distribution centers

Tekniset tiedot

SMI 1.5" Mechanical Seam Standing Seam Panels over Plywood Roof Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over a minimum ½ inch thick plywood roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact the SMI Technical Department to verify the decking assembly.
SMI 1.5" Mechanical Seam Standing Seam Panels over Steel Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify the decking assembly.
SMI 1.5" Mechanical Seam Standing Seam Panels over Insulated Steel Deck
1.5" Mechanical Seam Standing Seam Panels with 1½-inch high mechanically seamed ribs for installation over rigid board-insulated structural steel wide rib (WR, or "B") 22 ga. roof deck with a minimum slope of 2 inches in 12 inches (2/12). With slopes lower than a 2/12 roof pitch, contact SMI Technical Department for further installation direction and requirements. SMI 1.5” Mechanical Seam Standing Seam Panels are available with Florida State Building Code Product Approval and Texas Department of Insurance certificates. Contact SMI Technical Department to verify the roofing assembly.

Tekniset tiedot

Yksilöity viitesmi15mechanicalseam
TuoteperheMetal Roof Panels
TuoteryhmäRoof panels concealed fastener
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-10-20
Painoksen numero1

Linkit

Tuotteen urlhttps://sheffieldmetals.com/learning-center/profile/smi-1-5-mechanical-seam/
Tuotesertifiointihttps://sheffieldmetals.com/wp-content/uploads/2023/11/1.5MS_Cutsheet_0623.pdf
Tekninen kuvaushttps://sheffieldmetals.com/wp-content/uploads/2025/04/1-5ms-cutsheet_0425-v2.pdf

Liittyviä

Ensisijainen materiaaliTeräs
Toissijainen materiaaliAlumiini
Suunniteltu:Yhdysvallat
Valmistettu:Yhdysvallat

Luokitus

BIMobject-luokkaRakentaminen - Katto
IFC-luokitusKatto
ETIM-koodiEG019610
ETIM-nimiRoofing materials
Uniclass 2015 -koodiEF_30_10
Uniclass 2015 -kuvausRoofs
CSI MasterFormat 2014 -koodi07 41 13
CSI MasterFormat 2014 -nimikeMetal Roof Panels
OmniClass-numero23-13 39 27 11 11
OmniClass-nimikeMetal Roof Panels

Alueellinen saatavuus

Pohjois-Amerikka
Anguilla
Antigua ja Barbuda
Aruba
Bahamasaaret
Barbados
Belize
Bermuda
Brittiläiset Neitsytsaaret
Caribbean Netherlands
Caymansaaret
Costa Rica
Curaçao
Dominica
Dominikaaninen tasavalta
El Salvador
Grenada
Grönlanti
Guadeloupe
Guatemala
Haiti
Honduras
Jamaika
Kanada
Kuuba
Martinique
Meksiko
Montserrat
Nicaragua
Panama
Puerto Rico
Saint Kitts ja Nevis
Saint Lucia
Saint Vincent ja Grenadiinit
Saint-Barthélemy
Saint-Martin
Saint-Pierre ja Miquelon
Sint Maarten
Trinidad ja Tobago
Turks- ja Caicossaaret
Yhdysvallat
Yhdysvaltain Neitsytsaaret