Thermostatic wall-mounted mixer F4ET1002

F4ET-Med thermostatic wall-mounted mixer as DN 15 wall-mounted mixer, for wall mounting with lockable swivelling spout, for surgical sanitary facilities in the healthcare and nursing sector. Opto-electronically controlled, triggered by hand movement with subsequent automatic switching to body detection. Thermostat with metal handle, including lever for reduced-touch operation, and adjustable, turn-proof temperature stop. With the option of manual thermal disinfection. For connecting to hot and cold water. Control electronics, stagnation-free hygiene solenoid valve cartridge, flow rate controller 9.0 l/min, 6 V lithium battery (CR-P2) and sensor in the scald-protected safe-touch housing, polished chromium-plated brass. Decoupled from the tap housing, volume-reduced, smooth water flow from low-lead brass (lead proportion ≤ 0.2%), and without nickel coating. With thermal insulation components to reduce heat transfer from the tap housing to the cold-water line. Self-emptying spout with laminar jet controller. With adjustable and lockable connections with backflow preventers and strainers, fully covered by depth-adjustable screw rosettes. 296 mm projection. Activated water hygiene flushing 24 hours after last activation, safety switch-off for continuous reflection and saving of statistical data. With option for parametrisation and communication via optional, bidirectional remote control.

Tekniset tiedot

With backflow preventer	yes
Compatible A3000 open	no
Default automatic hygiene flush	24h after the last activity
Depressurised	no
With filter	yes
Adjustable flow time	yes
Functional principle	electronic self-closing
Hygiene flushing	yes
Diameter nominal	DN 15
Inlet size	G 1/2 B
Locking mechanism	Top section, non-ceramic
Material fitting	brass-look
Maximum flow time	255 Seconds
Minimum flow pressure	1 bar
Minimum flow time	1 Seconds
Type of mixing	with thermostat
Number of batteries	1
Overall depth	296 mm
Overall width	316 mm
Parameterization	remote control
Pop-up waste set	no
Power supply connection	Battery 6 V
Type of power supply	Battery
Protective system IP	IP59K
With rosettes/cover plate	yes
Protective shutdown	yes
Spout	rotating, bottom
Spout projection	200 mm
Surface finish fitting	chromed
Surface treatment fitting	polished
Temperature limit	yes
Thermal disinfection	manual
With transformer/power supply	no
Type of batteries	CR-P2 Lithium battery 6V
Type of mounting	wall mounting
Type of operation	sensor operation
Type of sensor	opto-electronic sensor
Type of tap	bib tap
Volume flow rate at 3 bar	0.15 l/s
Water connection	S-connections
Accent colour	none
Basic colour	chrome-look (glossy)

Tekniset tiedot

Yksilöity viite2030072425
TuoteperheTaps
TuoteryhmäElectronic taps medical
TyyppiObjekti (yksittäinen objekti)
Julkaisupäivä2024-10-10
Painoksen numero1
Leveys (mm)316

Linkit

Liittyviä

Ensisijainen materiaaliMessinki
Suunniteltu:Saksa
Valmistettu:Saksa
Nettopaino (kg)4.67

Luokitus

BIMobject-luokkaSaniteetti - Hanat/kraanat/messinkiesineet
Uniclass 2015 -koodiPr_40_20_87_98
Uniclass 2015 -kuvausWashbasin taps

Alueellinen saatavuus

Aasia	Eurooppa	Oseania	Pohjois-Amerikka	Afrikka
Arabiemiirikunnat	Alankomaat	Australia	Kanada	Etelä-Afrikka
	Belgia		Yhdysvallat
	Espanja
	Irlanti
	Italia
	Itävalta
	Kroatia
	Latvia
	Liettua
	Luxemburg
	Puola
	Ranska
	Romania
	Ruotsi
	Saksa
	Serbia
	Slovakia
	Slovenia
	Suomi
	Sveitsi
	Tsekin tasavalta
	Ukraina
	Unkari
	Venäjä
	Viro
	Yhdistynyt kuningaskunta