Insulated Fire Rated Doors FireStar® Model 700C

Key Product Features

• Max Height: 24’
• Max Width: 24’
• Max Square Footage: 324 sq. ft.
• Insulation: R-value = 5.0; U-value = 0.2
• Curtain: 3" insulated galvanized steel flat slats (#34 profile); 22-gauge steel front / 24-gauge steel backer
• Finish: Primed Gray, White, Beige or Brown
• Mounting: Face mount angle-in or angle-out; between jambs
• Operation: Chain hoist; motor*
• Automatic Closure: UL approved release mechanism with a 165° fusible link
• Locking: Slide bolts on manual operation
• Bottom bar: Galvanized steel double angle with weatherstrip and insulation
• Guides: three angle steel; factory painted black
• Brackets: 3/16" or 1/4" steel plates with sealed ball bearings, painted factory black
• Counter Balance: Steel pipe, painted factory black, of adequate size to restrict a maximum deflection of .033" per linear foot. Oil tempered, 20,000 cycle helical springs
• Governor: Viscous governor (if required); cable release engages to slow speed during automatic door closure per NFPA 80 standard
• Hood: 24-gauge galvanized steel round hood
• Label: Up to 4-hour Class A label in UL, ULC; up to 3-hour Class A label in FM; dependent on wall, jamb and mounting.

*Wayne Dalton uses a calculated door section R-value for our insulated fire doors.

Options

• Operation: motor, motor with chain hoist, wall crank, awning crank
• Curtain: 20, 18-gauge Steel front; 22, 20, 18-gauge stainless steel front
• Curtain finish: G-90 galvanized bare or painted beige or gray, stainless steel #4, powder coat**
• Locking: Slide bolts, cylinder, best lock, thumb turns
• Vision FireLites: 5" x 3/4" FireLite fenestration with glass vision lite
• Bottom bar: Stainless steel double angle, galvanized structural steel angle construction, sloped
• Bottom bar finishes: Primed black finish, stainless steel #4, powder coat**, hot dipped galvanized (double angle only)
• Bottom edge: Astragal, pneumatic or electric sensing
• Hood: 22-gauge round or square hood finished in bare galvanized, stainless steel #4, or powder coat**
• Guildes: Galvanized steel or stainless finished in stainless steel #4, powder coat**, hot dipped galvanized (structural steel angle only)
• Bracket finishes: Galvanized, stainless steel #4, powder coat**
• Perimeter seals: Angled guide brush, exterior lintel weather, flame baffle, smoke package (full perimeter seal, caulking, label)
• Wind load: Up to +/- 55 psf; options available to meet up to Dade County - Florida Building Commission
• Other options: Wind locks alternating or continuous with windbar, end covers, fascia, fire door release system, horns strobes, smoke detectors.

* Contact plant for door charts or more information

*Powder coat available in RAL or custom colors