Henkel Polybit Polyproof Ultra FB Pre Applied System

Traducido por Google,

Polyproof Ultra Plus es una membrana impermeabilizante a base de HDPE de alto rendimiento, preaplicada y totalmente adherida con un acabado granular fino inorgánico reactivo. La membrana está diseñada para formar una unión química y mecánica con el hormigón recién vertido, convirtiéndose efectivamente en una parte integral de la estructura.

Los campos de aplicación incluyen estructuras subterráneas de hormigón como:

- Sótanos

- Debajo de balsas

- Muro de contención

- Aplicaciones infraestructurales (túneles y puentes)

Especificaciones

Characteristics:
- Loosely laid membrane that remains independent of structural movements and settlements
- Cold-applied, easy, and quick to install, no priming required
- Chemical bond of pressure sensitive adhesive with concrete
- Mechanical adhesion through granular sand finish
- Effectively prevents lateral water migration
- Provides a water and moisture barrier
- Allows for immediate foot traffic on site
- Temporarily UV resistant during application and steel works (45 days during hot climate)
- Excellent resistance to chemical acids, alkalis, salts, and other corrosive materials
- White solar-reflective surface
Components:
1. Polyproof Ultra Plus: Fully-bonded, sand coated, pressure sensitive HDPE pre-applied, single layer loosely laid membrane for substructural waterproofing application.
2. Polyproof Ultra Plus TS: single-sided, self-adhesive tape with sanded finish. The carrier is coated with a pressure sensitive adhesive with excellent adhesion to the Polyproof Ultra Plus membrane.
3. Polyproof Ultra TSD: Polyproof Ultra TSD is a double-sided, self-adhesive HDPE tape. The carrier is coated with a pressure sensitive adhesive on both sides with excellent adhesion to the Polyproof Ultra Plus membrane.
4. Polyproof EPU: cold-applied, elastomeric, two-component hybrid polyurethane-based sealing compound, designed for detailing and repairing the Polyproof Ultra FB system and for filling imperfections on concrete surfaces.
5. Polyseal 1PU: Highly flexible, non-staining paintable one part polyurethane joint sealant with excellent recovery.
System specification:
- Membrane thickness, mm: min 1.2 (ASTM D 3767)
- Tensile strength [N/mm2]: >28 (ASTM D 412)
- Peel adhesion to freshly poured concrete, [N/mm]: >2.5 (ASTM D 903)
- Tear strength, [kN/m]: >130 (ASTM D 624)
- Lap peel adhesion, [N/mm]: >1.3 (ASTM D 1876)
- Puncture resistance, [N]: >1100 (ASTM E 154)
- Elongation at break, [%] >730 (ASTM D 412)
- Hydrostatic pressure resistance at the joints, [12bar or (120m)], No leakage (ASTM D 5385)
- Lateral water migration resistance @ [12bar or (120m)], Pass (ASTM D 5385)
- Low temperature flexibility @ -25ºC (ASTM D 1970)