Exterior Wash Pro M QUAD Outdoor-rated QUAD color wash light with creative control

Physical

• Length: 152 mm (5.98 in.)
• Width: 201 mm (7.91 in.)
• Height: 303 mm (11.93 in.)
• Weight: 7.3 kg (16.1 lbs)

Dynamic Effects

• Intensity: 0 - 100%
• Color Mixing: RGB + CTC (Color Temperature Control)
• Color Temperature Control: 1000 K - 12500 K in 50 K steps

Control and Programming

• Control Systems: DMX, RDM
• User Interface: Magnetic sensor for local diagnostics and focusing
• Stand-alone Control: Up to 20 scenes with individual fade/hold times
• Control Resolution: 8-bit DMX control of each color
• Dimmer Resolution: 16-bit DMX control of intensity
• DMX Channels: 6/3/7/4 (Standard/Basic/Extended/Raw)
• DMX Compliance: USITT DMX512/1990
• RDM Compliance: ANSI/ESTA E1.20
• DMX/RDM Transceiver: Galvanic-isolated RS-485
• Firmware Update: Serial upload via DMX link

Optics

• Light Source: 9 x high-power RGBW LEDs
• Minimum LED Lifetime: 100,000 hours (to >70% luminous output)*
• LED Manufacturer: Osram
• Binning: Tight color and flux binning
• Calibration: Full Gamut Color Calibration (1-step MacAdam ellipse)
• *Figure obtained under manufacturer's test conditions at Ta = 25° C.

Beam Angle Options

• Native Beam Angle: 8°
• Narrow Micro Lens: 10°
• Medium Micro Lens: 16°
• Wide Micro Lens: 30°
• Very Wide Micro Lens: 54°
• Asymmetric Micro Lens: 9° x 56°

Photometric Data

• CRI (Color Rendering Index): >70
• CCT: 1000K - 12500K (Default: 4000K)
• Luminous Output:
  • Full: 3700 lm
  • Red: 1260 lm
  • Green: 2490 lm
  • Blue: 940 lm
• *Measured in steady state (30 minutes warm-up time) at 25 °C ambient.

Construction

• Housing: Cast Aluminum
• Color: Traffic grey RAL 7042 or Traffic white RAL 9016 (other colors available on request)
• Surface Treatment: Anodized and electrostatic powder-coated
• Protection Rating: IP66
• Effective Projected Area (EPA): 0.056 m² / 0.072 m²
• Impact Resistance: IK08
• Corrosion Resistance: C5 High (ISO 12944-6)
• Vibration Resistance:
  • 1.0g Sinusoidal (IEC 60068-2-6)
  • 0.7g RMS Random (IEC 60068-2-64)
  • 3.0g (ANSI C136-31)

Installation

• Mounting: Adjustable bracket
• Orientation: Any
• Minimum Distance to Illuminated Surfaces: 0.1 m (0.3 ft.)

Connections

• Power Connection: 2 m (6.5 ft.) cable tail open ended
• Power Input Cable Type:
  • EU Models: H07RN-F 3G 1.0 mm², 450/750 V, VDE
  • US Models: PVC SJTW 3 x 1.31 mm² (16 AWG) 105° C 300 V VW-1
• Data Connection: 2 m (6.5 ft.) open-ended 6-conductor combined input + output cable tail
• Hybrid Power/Data Cables: In & thru 8-pin custom connectors available on request

Electrical

• AC Power: 100 - 240 / 277 V nominal, 50/60 Hz
• Power Supply Unit: Auto-ranging electronic switch-mode
• Typical Half-Cycle RMS Inrush Current: 12 A
• Surge Protection: 4 KV
• Max Earth Leakage: 0.5 mA
• Power Factor:
  • 0.99 @110 V / 120 V
  • 0.94 @208 V / 230 V
  • 0.90 @277 V
• Max Current Draw:
  • 0.75 A @100 V
  • 0.62 A @120 V
  • 0.33 A @230 V
  • 0.27 A @277 V

Power Consumption

• Maximum: 75 W (reduced mode 60 W)*
• Idle: 2.5 W*
• *Measurements made at nominal voltage. Allow for a deviation of ±10%. Idle: all LEDs at zero intensity.

Thermal

• Cooling: Convection
• Maximum Ambient Temperature: 45 °C (113 °F)*
• Minimum Ambient Temperature: -30 °C (-22 °F)**
• Total Heat Dissipation (calculated, ±10%): 256 BTU/hr
• *Above this temperature, the fixture regulates output to protect from overheating.
• Power must be maintained below -20 °C (-4 °F).

Environmental

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• Efficacy (Max Output): 43 lm/W
• LWR: 438 lm/kg (199 lm/lb)*
• *LWR = Lumen-to-Weight Ratio
• Packaging: FSC-certified cardboard inlay and outer box

Approvals

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU Safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• US Safety: ANSI/UL 1598
• US EMC: 47 CFR Part 15 Class B
• Canadian Safety: CSA C22.2 No. 250.0
• Canadian EMC: ICES 003(B), ICES 005(B)
• Australia/NZ: RCM
• United Kingdom: UKCA
• India: BIS IS 10322(Part5/section5)

Ordering Information - Fixtures

• Exterior Wash Pro M QUAD, EU, White: P/N MAR-90590102
• Exterior Wash Pro M QUAD, EU, Grey: P/N MAR-90590002
• Exterior Wash Pro M QUAD, US, Grey: P/N MAR-90590006

Ordering Information - Accessories

• Micro Lens Pro M - Narrow: P/N MAR-90590031
• Micro Lens Pro M - Medium: P/N MAR-90590032
• Micro Lens Pro M - Wide: P/N MAR-90590033
• Micro Lens Pro M - Very Wide: P/N MAR-90590034
• Micro Lens Pro M - Asymmetric: P/N MAR-90590035
• Baffle Snoot Pro M QUAD: P/N MAR-90590018
• Exterior Wash Pro Multitool: P/N MAR-90590025
• Hybrid PD Cable Tail In/Out 0.5 m, Black: P/N MAR-91700020
• Attachment Plate for Safety Wire: P/N MAR-90590050
• Hybrid PD Cable Tail In/Out 0.5 m, White: P/N MAR-91700022