119 gallon storage tank

Traducido por Google,

Tanque de almacenamiento 119G revestido de vidrio residencial/comercial

Especificaciones

Construction
The tank shall be manufactured from mild steel with
a baked on Cobalt enriched porcelain glass lining
Tank outer shell shall be steel with a baked on
powder coating for protection
The ECO-119GLBB Tank is only certified for Indoor
installation, it should not be located external to the building

Insulation
2" of High R value foam insulation will be sprayed on to the
bare shell of the tank to reduce heat loss

Connections
Connections to the Hot and Cold building supplies shall be
1 1/2" NPT Female type
Connections to the Hot and Cold piping to the Heat Pump
shall be 3/4" NPT Female type
Cold Water Piping from Storage Tank to Heat Pump
and return of Hot Water piping from Heat Pump to Tank
shall be 1/2" Copper or PEX.
2 of 4" long 3/4" Male x 3/4" Male connections will be boxed
which shall be located at the base of the ECO-119GLBB
2 x Magnesium anode rods shall be installed internally

Controls
The tank shall be supplied with a Temperature sensor
installed in a sensor well to control the GS5-45HPC & -D
Additional GS Heat Pumps connected to a tank shall
require an individual Temperature sensor
Tank Sensor wiring to the GS Heat Pump will be 18-2AWG
Two additional Thermowells are supplied with the Tank at
the Top and Bottom levels of the Tank so that a Controller
to provide Demand Response signals can be used

Pressure and Temperature Relief
Tank shall be supplied with a factory installed
ASME certified Pressure and Temperature Relief valve
Settings shall be at 150 Psig for Presssure and
210°F for Temperature

Especificaciones técnicas

Referencia119-gallon-storage-tank
Familia de productoResidential Tanks
Grupo de productosECO-119GLBB
TipoObjeto (objeto simple)
Día de publicación2025-09-05
Número de edición1
Altura (pulgadas)63.57
Ancho (pulgadas)28
Profundidad (pulgadas)28

Links

Instalación URLhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Instrucciones de instalaciónhttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Certificación de productohttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf
Descripción técnicahttps://eco2waterheater.com/wp-content/uploads/2024/08/SAN-119GLBK-Tank-Submittal-07-2024.pdf

Información relacionada

Material principalAcero Carbono
Material secundarioGranulado de vidrio
Diseñado enEstados Unidos
Fabricado enEstados Unidos
Peso Neto (kg)345

Clasificación

Categoría BIMobjectHVAC - Calentadores de agua
Clasificación IFC Calentador eléctrico
Código ETIMEG000043
Nombre ETIMResidential heating
Código Uniclass 2015Pr_60_60_96
Descripción Uniclass 2015Water heaters
CSI MasterFormat 2014 Code22 33 36.16
CSI MasterFormat 2014 TítuloCommercial Storage Electric Domestic Water Heaters
Número OmniClass23-31 29 00
Título OmniClass Hot Water Heaters

Disponibilidad en regiones

Norteamérica
Anguilla
Antigua y Barbuda
Aruba
Bahamas
Barbados
Belice
Bermudas
Canadá
Caribe Neerlandés
Costa Rica
Cuba
Curazao
Dominica
El Salvador
Estados Unidos
Granada
Groenlandia
Guadalupe
Guatemala
Haití
Honduras
Islas Caimán
Islas Turcas y Caicos
Islas Vírgenes Británicas
Islas Vírgenes de los Estados Unidos
Jamaica
Martinica
México
Montserrat
Nicaragua
Panamá
Puerto Rico
República Dominicana
Saint Barthélemy
San Cristóbal y Nieves
San Martín
San Pedro y Miquelón
San Vicente y las Granadinas
Santa Lucía
Sint Maarten
Trinidad y Tobago