ASI Architectural - Linear Wood Ceilings and Walls

Acoustical Surfaces, Inc.

ASI Architectural - Linear Wood Ceilings and Walls

Traducido por Google,

Techos y paredes lineales - Techos acústicos de madera

ASI Architectural ofrece tres estilos de techos lineales de madera, ya sea con chapa de madera real o madera maciza. Los módulos estándar son de 10 cm o 15 cm de ancho. Sin embargo, podemos proporcionar tablones de ancho personalizado de hasta 20 cm. El espacio entre tablones puede ser de 6 mm, 12 mm o 19 mm. Disponemos de soporte acústico de algodón reciclado para proyectos que requieren absorción acústica. No se requieren herramientas de instalación especiales. Los clips de instalación para la rejilla se fijan simplemente a la rejilla de suspensión con presión manual. Si se fija directamente a la estructura o al enrasado, ofrecemos un clip de fijación directa que se fija con un tornillo a través de un orificio en el centro del clip. El espacio lineal está disponible con una tira de relleno de fieltro, aluminio perforado o PVC sólido para bloquear la vista hacia el plenum entre los tablones. También disponemos de molduras perimetrales. Contamos con personal con certificación LEED™ para ayudarle con los productos FSC.

Características del producto:

Disponible en chapa de madera maciza o en las especies que se muestran a continuación*
Linear T&G está disponible en tres opciones de borde: ranura en V, ranura en V plana y junta a tope.
El marco lineal está disponible en tres opciones de ancho de marco: 1/4″, 1/2″, 3/4″
Moldura perimetral disponible hasta 6″
Tiras de relleno de fieltro o ABS para mejorar los espacios entre los tablones
FSC disponible
Puede contribuir a proyectos LEED®
ACABADOS: Capa superior de laca transparente, barniz clase A o teñido a juego.
Acabado de retoque disponible para aplicación en campo.

Especies de madera comunes: nogal, roble blanco, roble rojo, arce, cerezo, fresno, nogal americano, haya, bambú natural, bambú caramelizado
Otras especies de madera disponibles: llame para obtener más detalles.

Especificaciones

SECTION 09 54 26
Linear Wood Ceiling Planks
PART 1 GENERAL
1. SECTION INCLUDES
  1. Linear wood veneer, solid wood, and laminate ceiling planks with reveal.
  2. Accessories for ceiling installation.
2. SUBMITTALS
  1. Product Data: Submit manufacturer’s technical data sheet and installation instructions for each type of ceiling plank required.
  2. Shop Drawings: Submit shop drawings, including details, for all ceilings. Coordinate ceiling layout, installation, and suspension system components with construction elements that penetrate tile ceilings or are supported by them. Show overall layout with dimensions and details for penetrations and intersections with other materials or building components.
  3. Samples: Submit three (3) full size samples of each plank type and veneer type required.
  4. Certificates: Submit manufacturer’s certificate that products meet or exceed specified requirements.
  5. Test Reports: Upon request, submit certified test reports from recognized test laboratories.
3. MAINTENANCE MATERIAL
4. Extra Materials:
  1. Deliver no less than two percent (2%) of each type, color and pattern of material.
  2. Extra materials shall be from the same production run as the original materials.
  3. Extra materials shall remain in the manufacturer’s original packaging and given to the building owner upon substantial completion of the work. Store extra materials per instructions as described in storage and handling requirements.
PART 2 PRODUCTS
1. MANUFACTURERS
  1. ASI Architectural, 123 Columbia Court N, Chaska, MN 55318.
    Phone: 888-258-4637. Fax: 952-448-2613. Website: www.asiarchitectural.com
2. DESCRIPTION
  1. Product Description: Linear wood ceiling planks with reveal as manufactured by ASI Architectural.
  2. Product Options: For each item listed below, please select one (1) option from the choices.
    Plank Composition: (Wood veneer) / (Solid wood) / (Laminate)
    Core: Veneer and Laminate: Interior: (Class A FR Particle Board) / (Class A FR MDF Board) / Exterior: (MR Particle Board)
    Edge Banding: Veneer and Laminate: (To match veneer species and finish)
    Finish: Veneer Only: (Custom stain to match architect sample with clear lacquer topcoat) / (Clear lacquer topcoat)
    Laminate Only: (Laminate to match architect’s selection)
    Solid Only: (Custom stain to match architect sample with clear Class A topcoat) / (Clear Class A topcoat)
    Veneer Species: (Custom to match architect sample) / (Choose from list of standard species on ASI Architectural website)
    Plank Width: (3-1/4") / (3-3/4") / (5-1/4") / (Custom)
    Reveal Width: (1/4”) / (1/2”) / (3/4”)
    Plank Length: All plank composition options: (8’) / (10’)
    Solid wood only: (Random 3’ – 10’)
3. ACCESSORIES
4. Attachment hardware for ceiling planks as specified by manufacturer for installation.
5. Dowels for alignment.
6. Accessories with Options: Select one (1) option from the choices for each of the following accessories.
  1. (Felt – Interior) / (ABS – Exterior) Filler strip.
  2. Acoustical backer: (1") / (2") x 24" x 48". Black.
  3. Vertical trim: 3/4" x (4") / (6") / (Custom) x (96") / (120"). Vertical trim finish to match finish of ceiling planks.
PART 3 EXECUTION
1. EXAMINATION
  1. Verification of Conditions:
    Inspect installation area and conditions under which work is to be performed for compliance with all manufacturers’ environmental requirements.
    All wet work in the installation area must be complete, cured, and dry prior to installation.
    Work above ceilings shall be complete, inspected, and accepted before ceiling work begins.
2. INSTALLATION
3. Comply with manufacturer’s instructions and recommendations for installation of ceiling planks and industry standards.
4. Coordinate the exact size, location, and sequencing of penetrations of ceiling planks by all building components.
5. Lay out ceiling pattern per approved shop drawings if required. Where not otherwise indicated, lay out planks so margins on opposite sides of rooms are equal or greater than half (1/2) the plank width.
6. Where ceilings of different heights abut, install acoustical material matching ceiling at vertical surface of ceiling break to match ceiling.
7. ADJUSTING
8. Adjust planks after installation so that surfaces are aligned, flush, and level with gaps between units consistent in width and straight.
9. CLEANING
10. Clean surfaces of ceiling planks per manufacturer’s instructions.
11. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
12. PROTECTION
13. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.
END OF SECTION
QUALITY ASSURANCE
1. Qualifications:
  1. Manufacturers: Provide ceiling planks with reveal from a single manufacturer.
  2. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.
DELIVERY, STORAGE, AND HANDLING
1. Storage and Handling Requirements:
  1. Handle products carefully to avoid damage or chipping edges.
  2. Store products in a clean, cool, dry place, and out of direct sunlight.
  3. Store products in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.
SITE CONDITIONS
1. Ambient Conditions:
  1. Permit planks to reach room temperature, 50 to 86 degrees Fahrenheit. Stabilize moisture content, 25 to 55 percent RH, for at least 72 hours before installation per AWI standards.
  2. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.
  3. Do not install products under environmental conditions outside manufacturer’s recommended limits.
2. Existing Conditions: Do not install wood veneer ceiling planks until space is enclosed and weather proofed, wet work is completely dry, and work above ceilings is complete.
WARRANTY
1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

Especificaciones técnicas

Referencianst14689-01
Familia de productoDecorative Wood Walls and Ceilings
Grupo de productosDecorative Wood Walls and Ceilings
TipoObjeto (objeto simple)
Día de publicación2013-08-07
Número de edición1

Links

Instalación URLhttps://www.asiarchitectural.com/products/linear/
Instrucciones de instalaciónhttps://www.asiarchitectural.com/wp-content/uploads/2018/08/Linear-Reveal_Installation-Instructions_051118.pdf
Video tutorialhttps://www.youtube.com/watch?v=qLnQ9QxPjdk
Descripción técnicahttps://www.asiarchitectural.com/wp-content/uploads/2023/09/AA_Linear_Reveal_DetailBook.pdf

Información relacionada

Material principalMadera

Clasificación

Categoría BIMobjectConstrucción - Falsos techos
Clasificación IFC Techo
Código Uniclass 2015Ss_25_25_05
Descripción Uniclass 2015Acoustic panel systems
CSI MasterFormat 2014 Code09 54 33
CSI MasterFormat 2014 TítuloDecorative Panel Ceilings
Número OmniClass23-15 13 19 35
Título OmniClass Acoustical Wall Treatment

Disponibilidad en regiones

Norteamérica
Anguilla
Antigua y Barbuda
Aruba
Bahamas
Barbados
Belice
Bermudas
Canadá
Caribe Neerlandés
Costa Rica
Cuba
Curazao
Dominica
El Salvador
Estados Unidos
Granada
Groenlandia
Guadalupe
Guatemala
Haití
Honduras
Islas Caimán
Islas Turcas y Caicos
Islas Vírgenes Británicas
Islas Vírgenes de los Estados Unidos
Jamaica
Martinica
México
Montserrat
Nicaragua
Panamá
Puerto Rico
República Dominicana
Saint Barthélemy
San Cristóbal y Nieves
San Martín
San Pedro y Miquelón
San Vicente y las Granadinas
Santa Lucía
Sint Maarten
Trinidad y Tobago