CFAB™ Cellulose Absorptive Acoustical Panels

SECTION 09 51 13

CFAB Cellulose Acoustical and Thermal Ceiling Panels

PART 1 GENERAL

1. SECTION INCLUDES

1. CFAB cellulose acoustical and thermal ceiling panels and accessories for ceiling installation.

1. REFERENCES

1. American Society for Testing and Materials (ASTM)

1. ASTM C423: Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method.

1. ASTM E84: Standard Test Method for Surface Burning Characteristics of Building Materials.

1. ASTM E795: Standard Practices for Mounting Test Specimens During Sound Absorption Tests

1. ICC IBC: International Building Code

1. SUBMITTALS

1. Samples: Submit, at minimum, a 4” x 4” sample for each type of specified acoustical panel.

1. Test Reports: Upon request, submit certified test reports to verify specified product performance.

1. QUALITY ASSURANCE

1. Qualifications:

1. Manufacturers: Provide acoustical ceiling panels from a single manufacturer.

1. Installers: Utilize an installer having demonstrated experience on projects of comparable size and complexity.

1. Surface Burning Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM E84. Acoustical panel surface burning performance should comply with the International Building Code and other local building code requirements.

1. Acoustical Characteristics: Acoustical panels to perform as specified when tested in accordance with ASTM C423.

1. DELIVERY, STORAGE, AND HANDLING

1. Handle panels carefully to avoid any damage.

1. Store panels indoors in a clean, cool, dry place, and out of direct sunlight.

1. Store panels in a space where the ambient temperature and humidity conditions are being maintained at the levels indicated for the project when occupied for its intended use.

1. SITE CONDITIONS

1. Maintain ambient temperature and humidity conditions at levels indicated for the project when occupied for its intended use.

1. Do not install products under environmental conditions outside manufacturer’s recommended limits.

1. WARRANTY

1. Provide manufacturer’s written product warranty per Section 01 77 00 – Closeout Procedures.

PART 2 PRODUCTS

(Specifier Note: Red colored text below requires you to select an option before this specification can be completed. Options in red text are bound by parenthesis. Additional CFAB information can be found on our website www.acousticalsurfaces.com

MANUFACTURERS

1. Acoustical" class="redactor-autoparser-object">www.acousticalsurfaces.com
   ... Surfaces, Inc., 123 Columbia Court N, Chaska, MN 55318.
   Phone: 952-448-5300. Fax: 952-448-2613. Website: www.acousticalsurfaces.com

1. DESCRIPTION

1. Product: CFAB cellulose acoustical and thermal ceiling panels by Acoustical Surfaces, Inc.

1. Product Options:

1. Panel Composition: Recycled cellulose, cotton, and PET fibers

1. Panel Density: (3lb pcf) – 1” and 2” thicknesses
   (6lb pcf) – 1” thickness
   (8lb pcf) – 1/2" and 1” thicknesses

1. Panel Thickness: (1/2”) / (1”) / (2”)

1. Panel Size: (2’ x 4’) / (4’ x 8’) / (Custom up to 4’ x 8’)

1. Mounting Method: Adhesive, Stick pins

1. Acoustical Performance

1. Noise Reduction Coefficient (NRC) per ASTM C423

1. Surface Burning Performance

1. Fire Rating per ASTM E84: Class A.

PART 3 EXECUTION

1. EXAMINATION

1. Verification of Conditions:

1. Examine surfaces scheduled to received furred out or directly attached acoustical units for unevenness, irregularities or dampness that would affect quality and execution of work.

1. All wet work in the installation area must be complete, cured, and dry prior to installation.

1. Work above ceilings shall be complete, inspected, and accepted before ceiling work begins.

1. INSTALLATION
2. Comply with manufacturer’s instructions and recommendations for installation of ceiling panels and with industry standards.
3. CLEANING
4. Clean surfaces of ceiling panels per manufacturer’s instructions or recommendations.
5. Remove and replace damaged or discolored material and material that cannot be properly cleaned.
6. PROTECTION
7. Protect installed work from damage due to subsequent construction activity, including temperature and humidity limitations and dust control, so that the work will be without damage and deterioration at the time of acceptance by the owner.

END OF SECTION

Keywords:
cellulose acoustic panels
eco-friendly sound panels
recycled acoustic material
noise absorption boards
sustainable acoustics
recycled acoustical panels
industrial noise control panels
DIY acoustic panel core
acoustical panels
acoustic panels
CFAB cellulose acoustical panels
cellulose acoustic panels
eco-friendly sound panels
recycled acoustic material
noise absorption boards
sustainable acoustics
recycled acoustical panels
industrial noise control panels
DIY acoustical panel core
general acoustical panels / acoustic panels
high NRC cellulose acoustic panels (noise reduction coefficient)
sound absorption boards for echo control
reverberation reduction acoustic panels
cellulose panels for noise reflection control
Class A fire rated acoustic panels
mold resistant cellulose acoustical panels
low VOC acoustic panels (CDPH V1.2 compliant)
cellulose panels for STC wall assemblies
cost effective acoustic absorption solution
cellulose panels for breweries and tap rooms
eco-friendly cellulose acoustic panels
made from 80–85% post-consumer recycled fibers
renewable fiber acoustical panels
sustainable acoustical solutions for LEED projects
recyclable acoustic panels (no scrap waste)
green manufacturing acoustic panels (low energy, reduced pollution)
cellulose panels for WELL and Living Building Challenge credits
non itch, safe to handle acoustic panels
acoustic panels for industrial and mechanical spaces
brewery and tap room sound absorption panels
cellulose panels behind stretched fabric systems
acoustic backer panels for slatted wood walls/ceilings
under table and under chair acoustic absorption panels
recycled aesthetic acoustic panels for lofts and studios
cellulose panels for commercial noise control
cellulose acoustical panels for classrooms and community spaces
easy install cellulose acoustic panels
adhesive mounted acoustic panels
stick pin and washer installation panels
ceiling acoustic panels with mechanical fasteners
custom cut cellulose acoustic panels (12x12, 24x24, 48x48, 48x96 sizes)
lightweight cellulose acoustical boards
field cuttable acoustic panels (insul-knife, table saw)
safe handling acoustic panels (no special equipment required)
eco-friendly cellulose acoustic panels for industrial noise control
recycled fiber acoustic panels for breweries and tap rooms
cellulose acoustical panels for reducing echo in large spaces
Class A fire-rated cellulose acoustic panels for commercial buildings
mold-resistant cellulose acoustic panels for humid environments
DIY cellulose acoustic panel core for custom soundproofing projects
sustainable acoustic panels for LEED and WELL certified buildings
cellulose acoustic panels for behind fabric wall systems
cost effective cellulose acoustic panels for mechanical rooms
recyclable cellulose acoustic panels for green construction projects