Rada V10 Concealed Shower Valve

Product Reference

Rada V10 Concealed Thermostatic Mixing Valve (1.1651.005)

Standard product features

Connections:

• Inlets: 15 mm compression.

• Outlet: ½” BSP Flat Face/ 15 mm compression.

• Standard connections are: hot- left, cold- right, outlet- bottom or top.

Operation:

The Rada V10 is operated via a single sequential control which when rotated initially opens the valve, then increases the temperature from cold to a pre-set maximum.

Temperature Range:

• The maximum temperature that can be selected is factory set at approximately 41˚C, but this can be reset on site if required.

• Cold water temperature range 5–20˚C.

• Hot water temperature range (recommended) 55–65˚C.

• Maximum hot water temperature 85˚C

Note: In the event of loss of either supply, the valve will automatically shut off. Minimum temperature of the blend to either supply is 12˚C.

For reasons of general safety, hot water storage temperatures should be maintained at between 60–65˚C where serving ablutionary applications. The mixing valve can accept temporary excursions above 85˚C without damage, however operation at such elevated temperatures is not recommended.

Pressure/ Flow Rates:

• Minimum dynamic supply pressure: 0.15 Bar

• Maximum dynamic supply pressure: 5 Bar

• Minimum flow rate: 3 L/min

• Maximum flow rate: 30 L/min

• Maximum pressure ratio: should not exceed 10:1 in favour of either supply during flow

• Maximum static pressure: 10 Bar.

Materials:

• Body: Chrome Plated DZR Brass.

• Lever: Chrome Plated Zinc Die Casting.